![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: 5 Way Gang and Wall plate for TV
-
18th October 2009, 05:10 PM #1
5 Way Gang and Wall plate for TV
Hi All,
I'm getting Foxtel IQ2 installed requiring an extra cabel to come out of the wall.
Currently the wall plate I have is 4 way with 1 Cable TV, 1 Telephone and 2x Cat 5 Ethernet.
What I'd like is for 5 cables to come out of the same point on the wall to incorporate the extra cable required for the Foxtel.
My questions are:
1. Can I just get a 5 way wall plate and unclip inserts in existing 4 way wall plate and clip them into new wall plate?
2. Where can I get one of these plates from, bunnings said they were special orders. I'm expecting the foxtel cabel guy not to have a 5 way plate and use that as an excuse to drill holes in my timber floor for the new cabel. If I buy the plate myself first he'll have no excuse.
3. I'm confused by what I see on the web regarding wall plates. Dies the new wall plate require unscrewing the old plate from the wall and replacing with the new one?
Cheers
Seth
Read the full thread at RenovateForum.com...
Similar Threads
-
Kevin & his Gang
By wheelinround in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 4Last Post: 4th February 2008, 12:58 PM