Results 1 to 5 of 5
  1. #1
    Join Date
    Aug 2006
    Location
    melbourne
    Posts
    1

    Default P-Trap, disappearing water???

    I have a P-trap toilet that constantly loses the bowl water (its always gone after about 4 hours, sometimes though in 5 minutes) and consequently we get sewer stench coming in. There is definitely no leaks and the bowl is modern and seems well installed, the water just seems to get sucked away by a greater force/vacuum(?). Sometimes we can be in the room next door and hear a big gurgle and sure enough the bowl is empty.
    Any help appreciated.

  2. #2
    Join Date
    Jan 2006
    Location
    Melbourne
    Posts
    722

    Default

    Is there a sewer vent? Is it blocked? The vent on old houses can sometimes be away from the toilet right up the from of the property (or whereever the connection point is).

    Is the sewer pipe definately not partially blocked?

    There's probably better advice to come but this would be worth checking if you haven't already.

  3. #3
    Join Date
    May 2005
    Location
    Newcastle
    Age
    73
    Posts
    1,064

    Default

    Mate this was asked before so check this thread out

    http://www.woodworkforums.ubeaut.com...t=toilet+water


    Hope this helps
    Rgds


    Edited sorry wrong link
    Ashore




    The trouble with life is there's no background music.

  4. #4
    Join Date
    Jan 2006
    Location
    Blue Mountains NSW Australia
    Posts
    0

    Default

    Lack of Venting, or blockage as stated above.
    Can only be one of two, in their various forms.

    Vent is easy to check, if you are able to hop up on ladder or whatever, to get to the top of vent pipe. Vents are typically 2"-50mm. When you flush a dunny, hold your hand over the vent, and you will feel suction on the vent for a couple of seconds. If no suction, there may be a problem at vent/swv junction. I have seen some plumbers connect vents to line, with juction facing wrong way, which can lead to "stuff" getting caught and blocking vent, but not blocking 4" line. This can lead to your symptoms. This isn't the most likely cause though.

    Have a dig around the pipe where it exits your home, and there "may" be an IO there for you to have a look in and investigate. The most likely cause is a blockage which you might be able to clear yourself with a garden hose. If it looks more grizzly than that when you look, get a plumber. Believe me... when you stuff around hiring an eel etc, you are generally better off geting in a competent plumber who has all the gear to sort it out. $50.00 is reasonable for a five minute job, considering travel etc etc, and these things sometimes go the $500.00 for an all day tree root situation.

    Good luck.

  5. #5
    Join Date
    Aug 2005
    Location
    South Australia
    Age
    77
    Posts
    117

    Default

    Do you have a dog?

    Is his water bowl empty?

Similar Threads

  1. Hot water goes cold in the pipes: what to do
    By silentC in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 31
    Last Post: 19th July 2006, 10:16 AM
  2. Hot water system troubleshooting (bosch water wizard 780)
    By weezlebub in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 5
    Last Post: 5th July 2006, 07:41 PM
  3. One for the plumbers
    By Daddles in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 16
    Last Post: 3rd July 2006, 10:55 PM
  4. Gas hot water heaters
    By Bob Willson in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 28
    Last Post: 29th March 2005, 12:16 PM
  5. Water Crisis!!
    By Tikki in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 18
    Last Post: 19th November 2004, 03:51 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •