Newbie from Melbourne. Seeking advice and tools for an Architect moving to Furniture

[Cush]

*NB if you want to skip my intro, please scroll to the bottom of the page and let me know if you have any advice regarding purchasing 2nd hand or new tools. Thanks

I am a graduate architect, originally Irish, but have been in Melbourne for 8 years. Basically my story is that I have become fed up with the profession, spending endless hours in front of a computer screen, for a very low salary with almost zero job security , so I have decided to revert to a more hands on approach to design; furniture.

I would class myself as an advance beginner...if that makes any sense. I completed a semester long timber furniture workshop at Melbourne uni under the guidance of Hamish Hill and my grandfather was also an architect who reverted to furniture, so I spent a lot of my childhood working wood.

By complete chance, through a friend of a friend, I was introduced to a guy a few weeks ago who specialises in concrete and textile design who was looking for someone to share a studio and collaborate on some pieces of furniture. We got along well and have signed the lease on a studio together (Ironside, in Kensington). The space is small to say the least, only 4mx4m, but it is cheap and we can use power tools to our hearts content without disturbing any neighbours. I suppose everyone has to start somewhere, and without a garage of my own...the studio seemed a good option.

I was hoping you could give me some advice on setting up with regards machinery and tools to enable me to prioritise my spending at the beginning. Bearing in mind that I will start working in the evenings and weekends, then wind down my work to a 4 day working week and the office and then judge how viable it is to go to full time furniture

Most of the pieces we have in mind are coffee tables, shelving and outdoor furniture.

Currently most of the tools I have are basic DIY : Corded drill, jigsaw, radial arm saw, decent router, router bits, circular saw etc....

I have drawn up a bit of a wishlist and would love your thoughts on the importance of each item, or where I can get away with one tool covering two jobs (ie can a jointer do the same as a thicknesser?). Most of the hand tools are essentials, it is more in terms of organising which machinery to purchase first.

Priority #1 - A good work bench....I have been following gumtree and ebay but am yet to find a second hand one in decent nick. Our price range is about $200-250. Please drop me a PM if anyone has one going or knows of anyone they think might be selling.

Hand Tools
Marking Knife
Marking Guage
Try Square
Back saw
Coping Saw
Solid timber workbench with twin vices
Hand screw clamps
G Clamps
Mitre Clamps
Chisels
Mallet
Hand Plane
Block Plane
Dowelling Jig
Dust Mask
Sharpening stone

Machinery
Bandsaw
Table Saw (i have seen a few of these combined with a jointer in one machine)
Drill press
Jointer
Thicknesser / Planer
Belt Sander

Elec Tools
Cordless drill
Orbital Sander
Wet/dry vacuum

If you can spot any obvious omissions or have any tips on how I should go about setting up I would love to hear your expert opinion.

Looking forward to entering the world of woodwork.

Cheer guys

[tea lady]

Welcome! Looking forward to seeing your work. I'm no help with a tools list cos I don't have many myself. And mostly do turning. The space sounds a bit small for all that, but I guess you've got to start somewhere.

[Drillit]

Hello Cush,
Firstly - Welcome. Apart from the obvious of Ebay I suggest that you keep an eye on Grays on line. I have seen work benches for auction there and also good quality power tools, e.g deWalt. Also the WWW Show is coming up at Homebush from 27/29th July and you will have plenty of opportunities there. There is always a 2nd hand tool seller at the Show. I also look fowrard to seeing your work. Hope this helps. Drillit.

[AngelaPetruzzi]

wow, what a move after going thru the throngs of uni. But furniture making will be rewarding too.
Set yourself apart from the others and go into a niche area. E.g. use reclaimed timber with a sustainable and healthy finish. With the carbon tax, no, carbon price this will be the way to go. Re your tools etc. Go to manufactures or larger suppliers of the things you want, they often have good outdated models at very reasonable prices. Or they sometimes know of companies that want to downsize or close down and are happy for any price on their tools. Good luck with your venture.

[issatree]

Hi Cush,
On Sun. 18th. March 2012, you can go to the HTPAA TOOL SALE.
It is just off Glenferrie Rd. from Riversdale Rd. in Manningtree Street,
9am. start. There will be some great Tools there.
The Early Bird catches the Worm ?.

[munruben]

Welcome to the forum

[JJF]

Welcome to the forum

[Christos]

Welcome to the forum, which tools did you purchase first? Are you on the path to woodworking?