![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Door panel replacement
-
6th December 2012, 02:46 PM #1
New Member
- Join Date
- Dec 2012
- Location
- Austin, Texas
- Posts
- 2
Door panel replacement
Hey folks! I'm new to the forum, and I thought I might ask for a bit of help. I have and antique washstand that I am restoring and modifying for my parents, and I need to replace the panels in the doors. However, I have no idea how to take the doors apart without destroying them. How do I do it?
Can I melt the glue? I need to protect the finish, as I am not planning on stripping and restaining the whole thing. Its approximately 100 years old, if that matters.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
-
6th December 2012, 05:43 PM #2
SENIOR MEMBER
- Join Date
- Dec 2010
- Location
- Melbourne
- Age
- 80
- Posts
- 36
I think you will end up with an odd look by replacing the panel as it will never look as old as what you have,is there no way you can fix it in place,sometimes the odd flaw left in very old furniture adds to it's character.
-
6th December 2012, 07:41 PM #3
Hi there,
Welcome to the forums.
The frame would most likely be put together with animal glue. I would saturate the joints with hot water and tap them apart (after checking very carefully for nails or screws).
I'd clean the break in the front panel with spirits to get any grime out, and re-glue with animal glue. Clamping well. The panel seems to have a nice figure, I wouldn't want to lose that.
Clean the whole thing with fine steel wool and spirits (very lightly so as not to remove any original finish), to get rid of grime.
I'd give it a coat of neat shellac, allow to dry, rub back with fine steel wool, then I'd rag on a shellac BLO mix over a few days. Rubbing rubbing rubbing.
There's many ways to approach this, but this is what I would do.
Cheers,
Stu
-
7th December 2012, 04:14 AM #4
New Member
- Join Date
- Dec 2012
- Location
- Austin, Texas
- Posts
- 2
Re: Door panel replacement
Thanks for the input, Thumbthumper! Very helpful stuff. NRB, I'm replacing the panel with textured glass, which is why I want to disassemble the doors.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Similar Threads
-
Help for Gliderol Garage Door (panel door)
By apple0604 in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 13Last Post: 31st August 2012, 03:14 PM -
sliding door replacement
By Peter Jones in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 2Last Post: 13th April 2007, 05:00 PM -
Garage door noise - panel vs roller door choice ?
By Justin in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 20Last Post: 17th March 2007, 07:16 PM -
Front Door replacement, new one is shorter
By DOZ in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 10Last Post: 24th July 2006, 08:48 PM