Results 1 to 6 of 6
  1. #1
    Join Date
    Nov 2010
    Location
    Springvale
    Posts
    0

    Default I am totally confused about primer

    Hi guys, I have a children's rocking chair that i have sanded back to bare wood and i want to hand paint a colourful pattern on it with some tubes of artist acrylic paint that I already have lying around.

    I want to make sure the paint adhere's well as I dont expect my niece to treat it gently.

    I notice that if you read the label on a cheap can of primer from bunnings it appears to be the exact same formulation as the top coat stuff the only difference being that it's grey and the sticker says primer. ~scratching head~.

    If that's the case and an acrylic primer is the same as an acrylic top coat, um why use a primer?

  2. #2
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    64
    Posts
    0

    Default

    Some primers are specially comprised to adhere more firmly to the wood than the 'main' paint, sometimes by simply having different ratios of the same contents.

    But, putting that aside, a neutral base coat is always a good idea if you're painting. It gives you a solid base, so that the applied colour doesn't go "blotchy" if sections soak into the underlying wood - as the primer has already 'soaked in' instead.

    (Mind you, some primers are rip-offs when all is said and done! )
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  3. #3
    Join Date
    Feb 2009
    Location
    Bristol, UK
    Age
    66
    Posts
    0

    Default

    Skew has summed it up nicely, the only thing I'd expand on is that primers can also contain a filler for the grain to enable a smoother top coat to be achieved.
    Dragonfly
    No-one suspects the dragonfly!

  4. #4
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    84
    Posts
    0

    Default

    If you are using acrylics, primers are not usually absolutely necessary. The use of primers dates back to the oil based paint days where the primer was rich in Linseed oil and was to penetrate the timber surfaces and feed it with oil. I think paint manufacturers just like to sell you more of their products by advocating the use of primers. Of course there are some things that have to be primed with the appropriate undercoating primer, rusty metal and the like but if you have stripped it back to raw timber, I feel acrylics will serve the purpose quite well. Good luck with your project;
    Reality is no background music.
    Cheers John

  5. #5
    Join Date
    May 2007
    Location
    Gold Coast
    Age
    71
    Posts
    456

    Default

    The final quality of a painted finish is the result of the builtup and smoothing of the layers underneath. I've never been fully clear on the difference between primers and undercoats, but it has something to do with sealing the underlying structure and depends somewhat on whether the final use is for interior or exterior.

    As to the undercoat, I have found the undercoat layer to be most important as it fills the grain and usually dries to a sandable surface quicker than a usual topcoat formulation. Getting the undercoat applied and sanded to a good finish is the most important part of getting a good finish.

    I've found knotty pine to be a particular problem. The knots bleed through the undercoat and top coat layers. Even priming with pink primer before undercoat has not stopped this. I believe shellac my be a primer that could stop the knot bleed through and if I ever paint something like that again I might give it a try.

  6. #6
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    84
    Posts
    0

    Default

    Quote Originally Posted by Fuzzie View Post
    I've found knotty pine to be a particular problem. The knots bleed through the undercoat and top coat layers. Even priming with pink primer before undercoat has not stopped this. I believe shellac my be a primer that could stop the knot bleed through and if I ever paint something like that again I might give it a try.
    Aluminium paint will seal it just fine and stop the bleeding. Make sure you use an oil based aluminium paint though and not a bitumen based product. If you want a clear finish though, of course it would be no use using a paint to seal the pine. Best shot is probably shellac.
    Reality is no background music.
    Cheers John

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •