Page 1 of 2 12 LastLast
Results 1 to 15 of 24
  1. #1
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    53
    Posts
    1

    Default Woodworking Coffee Addicts II

    Seeing I can't bump the old thread and it was entrapped within Bob's mass of water purifiers, filters and telemetry I figured I would start a new one

    Let me start by saying it surprised me none that Bob was a coffee guru, when it comes to anything technical he is "The Man". Disappointed that on a my few visits to his I have never partaken in one of his creations though, you won't get away with it next time mate

    I have always been a coffee lover and have played with all manner of presses, stovetops and gimicks over the years. This culminated in my working as a barista for around 3 yrs part time when I did my grad dip a few years back. Since then we have got by on passable coffee from a Delongi machine that was a wedding present. In most cases it manages to pump out a better coffee than the run of the mill cafes. For beans I purchase local roasts where available, 5 Senses, Yahava, Ravens (Denmark) when my brother visits, Yallingup Coffee (Dunsborough) when my mate visits and when all else fails Gloria Jeans from the supermarket (I know, it is not fantastic but beats most of the other off the shelf beans when a quick fix is needed).

    So why have I started this thread now? Because I have just bought a single Group Carimali which is going to be plumed into a tank running rainwater all mounted in a portable coffee trolley topped with a slab of bluegum I milled a few years ago. So I am getting to mix my passions Once Carol the Carimali arrives I intend to give here some new timber group handes to match and will make a matcing timber handles tamper (just waiting on some stainless stock to machine my base out of).

    Will post more pictures as it all comes together.
    Attached Images Attached Images

  2. #2
    Join Date
    Dec 2005
    Location
    Stuarts Point, NSW
    Posts
    14

    Default

    Being a coffeeholic also, I'll keep this thread on my watchlist. Keep the updates coming burnsy

    Sent from a far away Galaxy using Tapatalk pro
    Pat, Mid North Coast, NSW

  3. #3
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Thumbs up

    I respectfully request that you pay due deference to that slab of
    blue gum and give it a good coating or three, on both sides, with
    a high quality finish!!

  4. #4
    Join Date
    Nov 2001
    Location
    Brisbane, Queensland , Australia
    Age
    61
    Posts
    0

    Default

    Congrats on the new machine...
    The Carimali is a very capable commercial grade machine. I saw one for sale, just like this one on CS just recently...
    You'll need a good grinder, to get the best from the beans, but I'm sure you're on top of that.
    If you'd like a source of consistently excellent roasted beans... I would highly recommend Jeff at mycuppa. The beans will arrive with the roast date usually in the last week, so they keep improving for the next week or so... , 'Fresh is best'
    Happy brewing...

  5. #5
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Looks good Burnsy. Fresh rainwater helps make great coffee and I reckon it tastes better than filtered water.

    Quote Originally Posted by Burnsy View Post
    Let me start by saying it surprised me none that Bob was a coffee guru, when it comes to anything technical he is "The Man". Disappointed that on a my few visits to his I have never partaken in one of his creations though, you won't get away with it next time mate
    Feel free to drop by anytime.

    In most cases it manages to pump out a better coffee than the run of the mill cafes. For beans I purchase local roasts where available, 5 Senses, . . . . . . .
    I have tried a few others from time to time but find I just can't find anything better than 5 Senses bean and have been buying from them since they started in 2000 so that I now qualify for the long term buyers discount.
    Delivery is only $4 and they have a good turnover of new beans and blends to make it interesting enough so I don't even bother with anything else these days. They have around 20 coffee buyers all around the world constantly looking at stuff for them.

    [QUPTE] Once Carol the Carimali arrives I intend to give here some new timber group handes to match and will make a matcing timber handles tamper (just waiting on some stainless stock to machine my base out of).[/QUOTE]
    Timber group handles sound like a good idea.

    What sort of a blender do you have or are looking at?

  6. #6
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    53
    Posts
    1

    Default

    Artme, one coat of Organoil already on it, will be built on over the coming week once it is docked to size.

    Andrew, the Carimali on CS and my new one are one and the same, one of the reasons I jumped at it was the rebuild thread showing it's complete strip down and rebuild in 2011, it went on the truck from NSW today

    I am looking at a Mazzer Mini for a grinder, interested in hearing your take on the e vs the doser Bob as I see you have the doser and I am leaning toward the e.

  7. #7
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Quote Originally Posted by Burnsy View Post
    I am looking at a Mazzer Mini for a grinder, interested in hearing your take on the e vs the doser Bob as I see you have the doser and I am leaning toward the e.
    I have two grinders, the Mazzer for Caf, and an Iberital specifically for for Decaf beans.

    The Inberital is a grind on demand grinder (not as fancy as the Mazzer as it cannot set a specific dose), but I like the manual doser better.
    One issue is I have 7, 12, 14 and 21g baskets so I would need 4 (well 3 really because I never use the 7g basket) specific dose settings - of course the way around that is to get two grinders
    Maybe it's just because that's what I got used to first place. People I know who have an e and just two basket sizes really like them

    When preparing coffee for a group of people, the manual doser is a bit quicker whereas with the e grinder I have to wait for the grinding of every dose.

  8. #8
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    53
    Posts
    1

    Default

    Quote Originally Posted by BobL View Post
    I have two grinders, the Mazzer for Caf, and an Iberital specifically for for Decaf beans.

    The Inberital is a grind on demand grinder (not as fancy as the Mazzer as it cannot set a specific dose), but I like the manual doser better.
    One issue is I have 7, 12, 14 and 21g baskets so I would need 4 (well 3 really because I never use the 7g basket) specific dose settings - of course the way around that is to get two grinders
    Maybe it's just because that's what I got used to first place. People I know who have an e and just two basket sizes really like them

    When preparing coffee for a group of people, the manual doser is a bit quicker whereas with the e grinder I have to wait for the grinding of every dose.
    From reading I am starting to lean toward the doser (good becuse it's cheaper) It seems most report the e timed grind on demand doses are not that accurate as they are measured on time so often need an additional manual topup. As I always make two or more coffee's the doser is likely a good choice and can still be used to grind on demand easily enough.

  9. #9
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Quote Originally Posted by Burnsy View Post
    From reading I am starting to lean toward the doser (good becuse it's cheaper) It seems most report the e timed grind on demand doses are not that accurate as they are measured on time so often need an additional manual topup. . . . .
    Yeah thats is irritating. Too little is not too bad - too much is the pain. What I do with the manual doser is slightly overfill the basket and then scrape the excess off the top back into the doser.
    With the other grinder I end up scraping it off into the knock box. The doser wastes some ground coffee because it leaves some grinds behind but it works out about the same if you are making a couple of coffees and less if you are making more.

  10. #10
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    53
    Posts
    1

    Default

    Quote Originally Posted by BobL View Post
    Yeah thats is irritating. Too little is not too bad - too much is the pain. What I do with the manual doser is slightly overfill the basket and then scrape the excess off the top back into the doser.
    With the other grinder I end up scraping it off into the knock box. The doser wastes some ground coffee because it leaves some grinds behind but it works out about the same if you are making a couple of coffees and less if you are making more.
    Mate if you don't have any wasted grinds what do you use to clean your chainsaw chain and season the machine after a clean.

  11. #11
    Join Date
    Nov 2001
    Location
    Brisbane, Queensland , Australia
    Age
    61
    Posts
    0

    Default

    I just use my Pharos.
    20.3 grams in, 20.3 grams of pure fluffy heaven out....
    I've also adopted the OE Slap-Shot method of dosing/tamping so there's not one little wasted grain....
    Just coffee goodness... In spades...

  12. #12
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    53
    Posts
    1

    Default

    Change of plans re grinder as a Gino Rossi CC45 conical burr followed me home yesterday I want to remove the dosing chamber and replace it with a catch cone or a fabricated shute. Anyone seen any good ideas? I have alloy to fab up a round shute so will try that first unless I can find a correct size alloy or stainless cone somewhere.
    Attached Images Attached Images

  13. #13
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Quote Originally Posted by Burnsy View Post
    Change of plans re grinder as a Gino Rossi CC45 conical burr followed me home yesterday I want to remove the dosing chamber and replace it with a catch cone or a fabricated shute. Anyone seen any good ideas?
    What about adapting the semi conical containers used by mini-blender shake makers.
    The acrylic is nice and thick so it can take a bit of handling.
    I was thinking it could be mounted in a lathe chuck and have a hole turned out of the bottom to suit basket.


    Attached Images Attached Images

  14. #14
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    53
    Posts
    1

    Default

    Was thinking the stainless versions of stick mixer cups I am pretty sure I have seen around the place. Possibly also inverted cocktail mixer, jam funnel or stainless vase. I am sure if I keep an eye out I can find one for far less than the US$230 it costs for a Mazzer Kony e one.

    Will keep the measurements handy and see what I find, for now I will modify the doser inlet to help reduce grinds being caught by the lip that is there now and just enjoy using my new toys. Carimali was loaded Friday so probably won't see it for at least a week and a bit.

    This is the doser inlet that needs "match porting"
    Attached Images Attached Images

  15. #15
    Join Date
    May 1999
    Location
    Tooradin,Victoria,Australia
    Age
    74
    Posts
    2,515

    Default

    I am glad I drink tea. Less drama.

Similar Threads

  1. Replies: 5
    Last Post: 10th March 2013, 09:55 AM
  2. Woodworking Coffee Adicts
    By Bushmiller in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 78
    Last Post: 1st August 2012, 10:16 PM
  3. Grr, thieving mongrel drug addicts
    By Acco in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 11
    Last Post: 6th July 2012, 12:35 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •