![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: Raffan's sharpening method
-
12th April 2007, 11:25 AM #1
Raffan's sharpening method
Richard Raffan who is a woodturner sharpens his blades on a 6 inch bench grinder by just touching the tooth, I can't make out whether he follows the angle of the tooth or just snips a bit of the tooth's end. Does anyone use his (or a similar) method as I'm wondering how well it would work.
-
12th April 2007, 03:44 PM #2
SENIOR MEMBER
- Join Date
- Feb 2004
- Location
- kuranda north qld
- Posts
- 289
their is a kiwi book by philips where they use a 100mm angle grinder to remove the top of the tooth , works well , if you have a steady hand and good eyes . best of luck bob.