Results 1 to 9 of 9

Thread: Autosol Rust EX

  1. #1
    Join Date
    May 2013
    Location
    Auckland, New Zealand
    Posts
    48

    Default Autosol Rust EX

    My new panel saw was delivered 2 weeks ago, although it was covered but it did rain on the day and water got to it, the saw costed a small fortune and I waited 2 years for it so I was a little frustrated with the stain, its like you bought an Lamborghini and on the first day it rained and you cant get off the water stain. the semi retired technician who came to site to commission the saw said to use Scotch brite but it didnt quite work, I did a bit of research online and it seems the only way to get the stain completely off was to sand it.

    Attachment 529270

    I know there must be a chemical solution that I can use
    before I go down the destructive sanding path, went to Bunnings to have a look and found this Autosol Rust EX, it looks promising, cost $19, thought I give it a try, took it home, followed the instruction, lightly scrubbed with sponge, and the results are immediate. I cant find the traces of the stain even if I am staring at where they used to be.

    The instruction says to wash it off with water, I used a dry cloth to rub it off, could use Simple Green?

    Dont leave it on for too long though, it will create a layer of very thin and very light rust, comes off very easily but take note.

    The blurry stuff on the table top is Silbergleit


    Attachment 529271Attachment 529272Attachment 529273




    SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12



  2. #2
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    Interesting - looks like Bunnies NZ stock it, but Bunnings Oz don't?

  3. #3
    Join Date
    May 2013
    Location
    Auckland, New Zealand
    Posts
    48

    Default

    Quote Originally Posted by Mr Brush View Post
    Interesting - looks like Bunnies NZ stock it, but Bunnings Oz don't?
    that’s odd. Bunnings here are owned by Bunnings Australia.

    well I am sure you guys can find it somewhere. You are a lot more industrious than NZ
    SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12



  4. #4
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    ....we're a lot more rusty too !!

  5. #5
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    Bunnings here have a habit of discontinuing the most popular products. Recently I needed a tint for some decking sealer I was using, and Bunnings kept every colour in stock except the one I wanted. Eventually I got it in on "special order" at Bunnies, much to the surprise of the manufacturer who said it was their best-selling colour (a light grey). Same thing happened with Rustins Wipe-On Poly finish a while ago. Bunnings works in mysterious ways, its' wonders to perform....

  6. #6
    Join Date
    Jul 2014
    Location
    Brisbane
    Posts
    38

    Default

    The plot thickens, Autosol in Aus don't even have Rust Ex on their website. There is a product called Metal Life Saver which has the same description/blurb as Rust Ex, looks like it's sold under a different name. Total Tools and Autobarn carry it as well.

  7. #7
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    Thanks for that - it does indeed look like the same stuff. I'll pick some up to try next time I'm at Autobarn. Cheers

  8. #8
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    75
    Posts
    496

    Default

    Autobarn is owned by Westfarmers who also own Bunnings. the plot thickens
    I would love to grow my own food, but I can not find bacon seeds

  9. #9
    Join Date
    Oct 2018
    Location
    Dandenong Ranges
    Posts
    31

    Default

    The original post got my attention and I too did an online search. I happened to be at my local Total Tools last week and bought a bottle of the MLS. Used it on the weekend, after wire brushing parts first. Works well

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •