Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
View Poll Results: Your most often used is?
- Voters
- 59. You may not vote on this poll
Results 1 to 15 of 60
Thread: What is your most used tool?
-
16th April 2006, 11:25 PM #1
Got Wood?
- Join Date
- Aug 2002
- Location
- Sydney, NSW, Australia
- Posts
- 3,807
What is your most used tool?
O.K. which tool do you find most often in your hand? (yes, leave the double entendre out of it )
For me, it's the try square.
__________________
-
16th April 2006, 11:26 PM #2
You've got to risk it to get the biscuit
- Join Date
- Jan 2006
- Location
- Canberra
- Age
- 32
- Posts
- 0
roughing gouge or skew chisel ( i mostly turn stuff )
S T I R L O
-
16th April 2006, 11:44 PM #3
SENIOR MEMBER
- Join Date
- Nov 2004
- Location
- Port Pirie SA
- Age
- 52
- Posts
- 3,693
My most used tools are machine's that dont fit in the hand... I vote other!
Thread title shoud be most used "hand" tool.......................................................................
-
16th April 2006, 11:53 PM #4
GOLD MEMBER
- Join Date
- Nov 2003
- Location
- Sydney
- Age
- 54
- Posts
- 5,942
I think it is hand plane for me. Actually the try square is pretty close too.
Visit my website at www.myFineWoodWork.com
-
16th April 2006, 11:59 PM #5
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Lost in Space
- Age
- 54
- Posts
- 1,575
click pencil:eek:
Just Do The Best You Can With What You HAve At The Time
-
17th April 2006, 12:03 AM #6
the redder the bedder
- Join Date
- Apr 2006
- Location
- melbourne
- Age
- 53
- Posts
- 39
Is a pencil a tool or a comsumable, a marking knife is a tool!
-
17th April 2006, 12:03 AM #7
SENIOR MEMBER
- Join Date
- Apr 2003
- Location
- Tolmie - Victoria
- Age
- 68
- Posts
- 2,747
This is a hard question Craig. The tool most picked up or the tool in the hand for the longest accumulative time? No double meanings intended
I use my chisels, marking gauge and planes on most jobs along with the squares, pencil, marking awl and dovetail marking template. I use my RAS and bandsaw quite a bit and my electric router but they are mainly used for breaking down and shaping larger pieces of timber.
A lot of time is used also on the whiteboard and paper if you can call those tools.
Yesterday I spent a fair bit of time on a cheap SCMS I bought.
The time spent was setting it up so it was square and half accurate. It will be used when I do those love jobs away from the shed such as some skirting boards for my cousin tomorrow morning and his bookcase in a few weeks/months time. Noisy savage dusty thing but it does the job near enough.
- Wood Borer
-
17th April 2006, 12:09 AM #8
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Lost in Space
- Age
- 54
- Posts
- 1,575
MArking - Incra Rule
Drilling - Drill Driver
Cutting - Block Plane
Pounding - MAllet
MAchine - Dust extractor
ME - Hands (You'd think Brain would be first here ............But No!) :eek:
REgards Lou
Just Do The Best You Can With What You HAve At The Time
-
17th April 2006, 12:18 AM #9
Got Wood?
- Join Date
- Aug 2002
- Location
- Sydney, NSW, Australia
- Posts
- 3,807
The most picked up was where I was coming from Rob.
Originally Posted by Wood Borer
-
17th April 2006, 12:21 AM #10
GOLD MEMBER
- Join Date
- May 2003
- Location
- Kuranda, paradise, North Qld
- Age
- 62
- Posts
- 4,374
Well, not in my hands, but I'm at my sliding panel saw for up to 8 hours a day (gets pretty bloody monotonous
)
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
17th April 2006, 12:29 AM #11
GOLD MEMBER
- Join Date
- May 2003
- Location
- Kuranda, paradise, North Qld
- Age
- 62
- Posts
- 4,374
Most picked up? that would have to be a tape measure - there's about a dozen of them around the shed, one in the front of the ute, two in the house and a couple in my carry all.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
17th April 2006, 12:29 AM #12
amateur timber tickler
- Join Date
- Mar 2005
- Location
- Brisbane
- Age
- 53
- Posts
- 112
Tape measure
I use it all the time - sometimes it's accurate sometimes it isn't
Should I get it calibrated ??People make mistakes...
That's why they put erasers on the end of pencils
-
17th April 2006, 12:40 AM #13
SENIOR MEMBER
- Join Date
- Apr 2003
- Location
- Tolmie - Victoria
- Age
- 68
- Posts
- 2,747
Mallet, pencil or marking gauge have to be seriously considered then. Originally Posted by craigb
- Wood Borer
-
17th April 2006, 01:58 AM #14
Dances with splinters
- Join Date
- Jul 2005
- Location
- Oberon, NSW
- Age
- 64
- Posts
- 0
If not my tape measure, then it'd have to be my "sharpened nail in a handle."
Pencils disappear too quickly around here.
- Andy Mc
-
17th April 2006, 03:38 AM #15
GOLD MEMBER
- Join Date
- May 2003
- Location
- Perth WA
- Posts
- 999
It would be the cordless drill.
As a matter of interest is a marking or measuring instrument a tool? A quick search pulled up this definition of a tool.
A tool is, among other things, a device that provides a mechanical or mental advantage in accomplishing a task. Most tools employ some form of simple machine, or a combination of them. For example, a hammer simply functions as a lever with the fulcrum (pivot point) being the hand of the user. The further out from the pivot point, the more force is transmitted along the lever. A sword combines a lever and a wedge.
Not trying to be smart but I am interested to hear opinions.Cheers,
Rod
Reply With Quote
