Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2007
    Location
    Moonee Ponds, VIC
    Posts
    0

    Default Hydronic heating panel location?

    I seem to have developed a difference in logic from most of the "experts" I have spoken to about hydronic radiator panel locations and I'm hoping that someone can set me straight!

    We have picked ourselves up off the floor after the quotes came in for hydronic heating for our house in Melbourne and resigned ourselves to paying >$11,000 for the system (fully installed).

    Both the architect and the suppliers that I have spoken to have recommended placing the panels underneath the windows - particularly in bedrooms. From a convenience perspective I get it because it is rare that you want to put furniture in front of the window, however from and energy efficiency perspective it seems flawed! Given that I am filling the external wall cavity with R2.5 batts (my eski theory for house insulation) why would you place the heater such that the convective heat passes in front of the part of the room that has the least insulation (R0.5 at best)? Add to that, we will probably add full length curtains that, when closed will quite nicely trap the heat between the window and the curtain!

    Am I mad or should I rather locate the panels ideally against an internal wall away from the window so that the convective heat distrbutes through the room and the radiated heat does not get lost through an external wall?

    Stuart

  2. #2
    Join Date
    Oct 2003
    Location
    Kentucky NSW near Tamworth, Australia
    Age
    86
    Posts
    1,067

    Default

    Stuart

    I spent several years installing ducted heating systems and we always tried to install the registers under the windows or in front of the fixed panel of sliding doors.

    Now this wasn't for any of the reasons that you have stated but because cold air comes off windows and glass doors and with the register or the heating element or in your case the hydronic panels and the heat mixes with the cold air and as heat rises it takes the cold air with it so as you don't have cold drafts coming of the windows and doors and i agree with both your architech and heating supplier.

    What I don't understand is why they haven't explained this to you.

    I had had people sitting in a room with all the windows and doors closed and complained about having draughts making the cold around the legs.

    In fact the best senario in a cold climate with windows is to have curtains with a pelmet at the top and have the curtains touching the floor and this will cut off the drafts.

  3. #3
    Join Date
    May 2007
    Location
    Sutton Grange
    Posts
    4

    Default

    Stuart,

    I've just taken delivery of a wood fired hydronics system for my new house. (Cost me $10,000 for the boiler, flues, radiators etc but not including installation and copper pipes - that's another $3-4,000.)

    The manufacturer provided plans for the placement of the radiators. None of them are below windows. As it happens, all the windows are almost full wall height so it would not have been possible to put radiators below them, but I don't think the supplier knew that when he decided placement.

    I don't know who is correct but if you ask me this time next year I will have a more considered view.

    Bill

  4. #4
    Join Date
    Oct 2003
    Location
    Kentucky NSW near Tamworth, Australia
    Age
    86
    Posts
    1,067

    Default

    Just on another comment:

    Placement of panels will also depend on access for the pipes.

  5. #5
    Join Date
    Sep 2006
    Location
    Melbourne
    Posts
    2

    Default

    Take this from someone who's lived in Europe for 30 years with hydronic heating: the panels go on the external wall, ideally under a window.
    I am having hydronic put into our new house, the panels have just been installed.

    A word of caution: if you think you wouldn't be happy with 21 degrees max in your living area when it's really really cold outside (depends on the city, for Melbourne that's 4.5 degrees), make sure you mention this to your installer, as panel size calculations are done this way.

Similar Threads

  1. Slab heating advice: fact or fiction
    By John G in forum HEATING & COOLING
    Replies: 18
    Last Post: 25th June 2006, 08:25 PM
  2. Raised panel finishing sequence
    By Mitch Harper in forum FINISHING
    Replies: 2
    Last Post: 25th October 2005, 11:16 AM
  3. Hydronic Heating
    By Pulpo in forum HEATING & COOLING
    Replies: 3
    Last Post: 28th July 2004, 04:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •