Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
17th July 2014, 09:52 PM #1Senior Member
- Join Date
- May 2005
- Location
- Morphett Vale, SA
- Age
- 56
- Posts
- 272
Mixed hardwoods, veneers...all my stock !!
I'll start this thread by saying I am currently selling everything in my shed, tools, wood etc etc. I am undergoing a change in personal circumstances that means my woodworking is done for the foreseeable future. How that relates to this post is that I don't have time to take pics, answer heaps of questions etc etc but means for you CHEAP !!
Also, this is a take it all deal, I don't have time to separate, re-advertise bits and pieces etc....I just don't want to take it to the dump
I have I estimate over 1 cubic meter of various hardwoods and about a dozen or so veneers, maybe more. The whole lot will fill easily a 6x4 trailer maybe twice.
Listed in qty, length, width, thickness and ALL APPROXIMATES, would take me a month to catalog this properly.
Jarrah.
8 of 1600 x 150 x 25 "new" boards
40 of 1600 x 40 x 22
1 of 1000 x 150 x 40
20 of 1800 recycled floorboards...free nails
Blackwood
Various small bits some 1000 x 150 x 20 for example but various, enough to fill 2 wheelbarrows...all this has been machined
4-5 of 1600 x 40 x 40
2-3 of 1600 x 150 x 20
NG Flamed rosewood
1 of 800 x 250 x 50
Some smaller pieces
Mahogany
Small amount
Redgum
15-20 1000 x 120 x 25 some natural edge, some with nice figure, most with usual checks etc that redgum has
5 of white posts off side of road (no I didn't steal them) these still have paint and some have reflectors...but the timber underneath is nice from the couple I've machined. 1200 x 100 x 100
Sydney Bluegum...Not 100% sure this is SBG as it's from a lot I bought through this forum back in about 2006 as seconds from a mill in NSW?
50+ new floor boards 600-1000 x 90 x 21
12 of 1000-1600 x 190 x 35
Flooded or Spotted gum...same as above not sure on species but from same lot
10 new floor boards 1000-1600 x 90 x 21
5 of 1000-1600 x 190 x 35
Elm (I think)
1 of 1200 x 300 x 40 still has bark, has slight curve, not machined
Camphor Laurel
1 of 900 x 250 x 35 rough sawn
Veneers
There is a mixed pack from Carbatec none have been used
1 of camphor L about 600 x 200
about 3-4 others whose names escape me approx 300 x 400
There's more but I am just going by memory so won't keep going . I think Jarrah is worth more than my asking price.
$400, pick up only in Hallett Cove, SA this weekend (19/20 July) preferably.
This is an opportunity to stock up !!! Please re-read the start of this post.
Thanks
Redgy
-
17th July 2014, 10:37 PM #2
If only the clutch didn't go on the rodeo last week, taking the hobby budget with it...
I've got the car and trailer to easily bring that back but not the cash for the timber and petrol.I got sick of sitting around doing nothing - so I took up meditation.
-
17th July 2014, 10:47 PM #3
-
17th July 2014, 10:52 PM #4Junior Senior Member
- Join Date
- Dec 2008
- Location
- Adelaide, SA
- Posts
- 628
Can I reserve this lot until you answer the question that I've sent to u pls?
-
17th July 2014, 11:08 PM #5Senior Member
- Join Date
- May 2005
- Location
- Morphett Vale, SA
- Age
- 56
- Posts
- 272
Similar Threads
-
TAS Hardwoods
By Burf in forum FINISHINGReplies: 2Last Post: 23rd November 2002, 09:31 PM