![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: Aluminium windows
-
6th February 2007, 01:34 PM #1
The Worshipful Woodworker
- Join Date
- Jan 2006
- Location
- Canberra
- Posts
- 12
Aluminium windows
Has anyone had any experience with making their own aluminium windows ?
-
6th February 2007, 01:47 PM #2
SENIOR MEMBER
- Join Date
- Apr 2005
- Location
- Sydney
- Age
- 64
- Posts
- 882
I was going to build a house load of windows and doors at my sisters house, using a Capral commercial system, and I'd ordered all the materials, but then I got crook (bad back) and my brother did the job whilst I was off.
It's easy to do with a fine toothed drop saw and a drill, and it ended up cheaper than any quote we'd had. I was considering building my bifold doors out of aluminium, but timber was a bit cheaper, and looks better for mine.
-
6th February 2007, 02:00 PM #3
I used to make them up from kits when I worked for a glazier. What do you want to know?
-
6th February 2007, 05:07 PM #4
The Worshipful Woodworker
- Join Date
- Jan 2006
- Location
- Canberra
- Posts
- 12
I've been making timber casement windows and door frames for the house we're building. But havn't had any experience with aluminium. Not sure really where to start. I've talked to aluminium suppliers around here and got the "you need special equipment" response. I've drawn up the dimensions, just not sure who to approach for the channel - or even which channel I require. All help gratefully received.
-
6th February 2007, 06:14 PM #5
Window manufacturers all have their own extrusions. Typically, you would need a minimum of 5 or 6 different types to make a slider for example: top and bottom rails, stiles for the frame, that's 3. Then depending on the design, either 2, 3 or 4 different extrusions for the slider.
All this stuff is available in lengths which you dock to size. You need to notch out stiles (usually) to fit the rails. Slider frames are sometimes mitred, or sometimes notched. Notching can be done with a hacksaw/drop saw and a file. It's tedious and you need to be precise or you'll have gaps.
Then there's the various bits of hardware that have to be fitted: weather seals, friction buttons and wheels on the slider etc.
Not a trivial task, so if you're keen to do it, I'd be looking to see if there is a supplier who will give you everything you need, including cutting lists for each size and instructions. Maybe check out the mob Pawnhead mentions.
If you want to make fixed, then you could just use a commercial shop front system, which is a lot simpler.
-
6th February 2007, 06:18 PM #6
For fixed windows, the stuff I'm talking about is called "centre glazed framing". See: http://www.capral.com.au/capral/_pro...tail.jsp?id=47
-
6th February 2007, 06:43 PM #7
SENIOR MEMBER
- Join Date
- Apr 2005
- Location
- Sydney
- Age
- 64
- Posts
- 882
Silent C is on the money. There's a lot more to it than just cut and assemble, but it's not that hard to do when you've read all the information, and you're on a roll. The lengths you'll need usually only come in 6.5 metres, but if you can find a local assembler then you might be able to buy shorter lengths from him at a premium.
There is a specifier/estimator CD that you can get here if you convince them that you're an architect, builder, or work in QS, But what I did is just rang them and asked for the CD. They said they were out of stock and they'd have more shortly, so I said that's not good enough. I've got a contract and I want to build these things now. They emailed me about fifty pages worth of detailed drawings and specs on their systems and I printed out the relevant documents to what I was fabricating. You can easily see how they go together by looking at these drawings.
They didn't ask if I was a builder, just jump up and down until they give you what you want.
edit: -You don't need any special equipment. Just a drop saw a drill, a hack saw, screwdrivers and spanners.
It looks like I've lost all the specifications, but I've found the order list which will give you an idea of the components involved in five commercial awning windows ( A lot larger, and better looking sections than flimsy domestic aluminium windows), two large fixed panes, and two glazed doors: -
Please supply prices for the following.
Capral Narrowline series 300 frame, series 35 inset awning sashes, series 275 doors.
Anodised in selected colour, T.B.A.
Part Description Lengths @ 6.5m Price Total
EP5115 Sash rail 7
EL6337 Glazing bead 7
EU4760 Sash stop bar 7
EP2206 Frame, jamb 9
EP2205 Transom 2
EU9182 Transom bead 2+
EP2207 Infill 4
EP1481 Hinge style 1
EP5703 Lock style 1
EN7610 Bottom rail 1
EK7556 Glazing bar 1
EN7613 Top rail 1
EU5003 Stop bar 2
15x15x2mm Channel Channel 1
25x3mm flat Flat bar 2
Accessories
M981717 Hinge # 7
M275030 Assembly pkt. # 2
M029622 Screw # 2
M270007 Setting block # 4
M270009 Glass stop # 8
M586100BK Lock* # 2
M028354 Hinge screws # 50
M029642 Screw 25x8
M028752 Screw 10x8
M028598 Screw 25x10
M575111 Cover clip # 8
M138103MF Cornerstake # 40
M138119BK Cam handle # 10
M027314 Inner gasket 42m
M027171 Outer gasket 42m
M027215 Gasket 13m
M027378 Mohair strip 5.4m
Stays Sash stays # 10pr
Similar Threads
-
Painting Aluminium Windows.
By Lynds in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 4Last Post: 28th March 2008, 05:11 PM -
aluminium windows
By rackrussel in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 2Last Post: 21st September 2005, 10:15 AM -
Aluminium sliding windows
By FrankS in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 2Last Post: 4th May 2005, 07:36 AM -
Abbot and Costello (04 version for windows)
By Iain in forum JOKESReplies: 0Last Post: 18th August 2004, 09:32 AM -
In regards to round windows...
By sognal in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 11Last Post: 28th May 2004, 04:28 PM