Results 1 to 12 of 12

Thread: Mains pressure?

  1. #1
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default Mains pressure?

    Does anyone have any idea what "mains pressure" is? I need to plumb my shed for compressed air and rather than use copper I thought I might go with that Pex tubing. I know that I can definitely run 120psi through copper pipe but am unsure of the Pex tubing. When I asked my supplier I was told that it is rated for mains pressure, but don't know what this is deemed to be. I know I could just run airline hose around the shed but I want to have multiple droppers from the ceiling with regulators and water traps on each one to run some of my machines and would rather do it right.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  2. #2
    Join Date
    Nov 2004
    Location
    Guluguba Queensland
    Age
    52
    Posts
    48

    Default

    Mains pressure is anything upto at least 120 psi. I've no idear what pex is. I use 16mm polly for air you could use pvc but it is harder to make changes after you have finished.

  3. #3
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Cant help with that one Mick, I do know hot is on the left and.......errrrrr, something flows down hill? :confused:

    Al

  4. #4
    Join Date
    Jul 2003
    Location
    Near Bodgy, AlexS, Wongo & CraigB
    Age
    19
    Posts
    744

    Default

    mickalus,

    mains is variable - it depends on what utilsation is happening at the instant you use / measure it. for instance when industry is open duering the day it will drop when people start to go home it rises.

    I have a limiter on my house to 650KPI. up to 1000 is normal. always make sure your limiters or pressures are rater better than 10% of what you esxpect to use. (make sense ?)

    hope this is good enough - mostly you'll have up to 1000, when me plumber measured mine it was 1100KPI at the meter.

    cheers
    Zed

  5. #5
    Join Date
    Nov 2004
    Location
    Guluguba Queensland
    Age
    52
    Posts
    48

    Default

    1100 psi !!! you must have some good pluming. Class 12 polly which is normaly used for town pluming is rated at about 170 psi. 1100 psi would blow it to bits. Your not mistaken with kpa are you?

  6. #6
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Zed, your definitely getting your kPa (NB Captial "P") and psi mixed up. Mains is typically around 100 - 120 psi, 7 to 8 atmospheres or 700 - 800 kPa.

  7. #7
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

    Default

    Mick,
    Look up pneumatic suppliers in the yellow pages they sell plastic piping for installations such as yours, might as well get the right stuff rather than the plumbing grade

  8. #8
    Join Date
    May 2005
    Location
    Newcastle
    Age
    73
    Posts
    1,064

    Default

    Quote Originally Posted by journeyman Mick
    Does anyone have any idea what "mains pressure" is? I need to plumb my shed for compressed air and rather than use copper I thought I might go with that Pex tubing. I know that I can definitely run 120psi through copper pipe but am unsure of the Pex tubing. When I asked my supplier I was told that it is rated for mains pressure, but don't know what this is deemed to be. I know I could just run airline hose around the shed but I want to have multiple droppers from the ceiling with regulators and water traps on each one to run some of my machines and would rather do it right.

    Mick
    Mick what pressure are you going to be able to supply to your shed
    What is the pressure from you compressor then run piping to suit
    The only Mains pressure I have heard of is with water pressure, the question is who supplies compressed air at mains pressure, mabye your supplier was confuser and didn't want to show his lack of knowledge on the subject , as to using Pex tubing and the pressure limitations try the web page or the fact sheet from your supplier


    Rgds
    Ashore




    The trouble with life is there's no background music.

  9. #9
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    64
    Posts
    0

    Default

    Our local Bunnies sells air-line by the metre; I've been considering plumbing my shed with it, running with droppers down to near each DC gate. No problems with pressure rating that way...
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  10. #10
    Join Date
    Nov 2004
    Location
    Guluguba Queensland
    Age
    52
    Posts
    48

    Default

    What ever pex is it will handle air at 120 psi not a problem. Just sounds dear to me.

  11. #11
    Join Date
    Mar 2005
    Location
    Too close to Sydney
    Posts
    133

    Default

    The Poly that they use for plumbing has higher PSI ratings than copper according to our plumber. Rehau is the brand he uses.

    I dont think you will have a problem with any of the plumbing (water) products if used for air. I've had this discussion with the plumber already. His pressure tester goes a lot higher than 120 PSI.

  12. #12
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default

    Thanks all,
    I guessed that anything rated for mains pressure water would be able to handle 120psi air but I thought I'd better check. There's only one specialist pneumatics suppler in town and I'll see what they have, but somehow I doubt that I'll find anything that's going to be cheaper. I've seen PVC used but it does get brittle after a while and I've seen it blow up as well. At any rate it will be cheaper than copper (and quicker to fit).

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

Similar Threads

  1. One for the plumbers
    By Daddles in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 16
    Last Post: 3rd July 2006, 10:55 PM
  2. Pressure Pump - pressure switch setting?
    By Woody Allan in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 4
    Last Post: 4th January 2006, 04:12 PM
  3. the pressure is on
    By Christopha in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 29
    Last Post: 12th October 2004, 04:42 PM
  4. GMC Pressure Washer
    By echnidna in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 4
    Last Post: 22nd December 2003, 10:38 AM
  5. What pressure for spray gun?
    By hamster in forum FINISHING
    Replies: 7
    Last Post: 10th January 2001, 04:37 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •