Results 1 to 10 of 10
  1. #1
    Join Date
    Sep 2005
    Location
    campbelltown NSW
    Age
    68
    Posts
    297

    Question Carbide tipped blades

    G'Day All,
    I was wondering if it is possible to "touch-up" a carbide tipped saw blade, if the answer is yes, what do I use to do so?....
    Is it a diamond stone/file?...
    As I have had it to the "Saw Doctor" on one occassion to replace a tooth and sharpen the rest, I've noticed the last few weeks the end of the cut, the timber is getting splinters and a bit furry as opposed to when new it was very clean. I have a working knowledge of traditional blades, setting the teeth and so forth but I'm a little lost when it comes to TCT blades, any advise would be welcome, or is it time for the Dr again?...
    savage(Eric).
    savage(Eric)

    Never, under any circumstances, take a sleeping pill and a laxative on the same night.

  2. #2
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    I have sharpened one with a diamond file,
    Took an hour or so.
    Regards, Bob Thomas

    www.wombatsawmill.com

  3. #3
    Join Date
    Sep 2005
    Location
    campbelltown NSW
    Age
    68
    Posts
    297

    Default

    G'Day Bob,

    are they a readily available item or do I have to go to a tool supplier to get one?
    savage(Eric)
    savage(Eric)

    Never, under any circumstances, take a sleeping pill and a laxative on the same night.

  4. #4
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Try bunnings
    Regards, Bob Thomas

    www.wombatsawmill.com

  5. #5
    Join Date
    Jun 1999
    Location
    Westleigh, Sydney
    Age
    78
    Posts
    1,332

    Default

    Before you start sharpening, hit the teeth with oven cleaner (Mr Muscle) to remove any resin build-up. You may find this is all you need to do.
    Visit my website
    Website
    Facebook

  6. #6
    Join Date
    Sep 2005
    Location
    campbelltown NSW
    Age
    68
    Posts
    297

    Default

    Quote Originally Posted by AlexS
    Before you start sharpening, hit the teeth with oven cleaner (Mr Muscle) to remove any resin build-up. You may find this is all you need to do.
    Alex,
    Will do, but they don't look like when they came back from the Dr's keen chisle like but I have been cutting a lot of Pine (lots of resin in that I'm guessin') I'll take it off in the morning and have a good look.
    Bob,
    I'll be near Glenfords tommorrow, Bunnies is out of the way for me so I'll ask them if no luck I'll try Bunnies.
    Thanks all, much appreiciated.
    savage(Eric)
    savage(Eric)

    Never, under any circumstances, take a sleeping pill and a laxative on the same night.

  7. #7
    Join Date
    May 2004
    Location
    Pakenham, outer Melb SE suburb, Vic
    Age
    55
    Posts
    549

    Default

    Different spin on cleaning the blade, do a search on Simple Green. It's a heavy duty detergent from the US, find it in homewares at Bunnings.

    Suggested it to Dean (onlinetoolreviews.com.au) a while back & he reckoned he got good results. Might be a bit less severe than the oven cleaner.


    Cheers....................Sean


    The beatings will continue until morale improves.

  8. #8
    Join Date
    Sep 2005
    Location
    campbelltown NSW
    Age
    68
    Posts
    297

    Default

    Thank's Sean, I'll remember that one too!

    savage(Eric)
    savage(Eric)

    Never, under any circumstances, take a sleeping pill and a laxative on the same night.

  9. #9
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    If its only got pine resin buildup, turps and a toothbrush will take it off quick
    Regards, Bob Thomas

    www.wombatsawmill.com

  10. #10
    Join Date
    Sep 2005
    Location
    campbelltown NSW
    Age
    68
    Posts
    297

    Default

    G'Day All,

    problem solved, took the blade off this arvo', didn't get a chace this morning, but went out and spoke to a bloke at Gasweld about a diamond file, he didn't have any but gave me a "free sample" left by a rep. Got home and put up 4 blinds for SWMBO, then up to the shed took off the blade and scraped a tooth with a small cheapo blade and low and behold a "scale" popped of the tooth:eek: , sharp as ever underneath , cleaned them all and wire brushed them for good measure and oiled and steel wooled the body of the blade. The outcome, it cuts like new! .. Thank you all for your tips, all taken for future reference and I'm a bit wiser for the exercise!....
    savage(Eric)
    savage(Eric)

    Never, under any circumstances, take a sleeping pill and a laxative on the same night.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •