![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
-
6th December 2018, 10:20 AM #1
Novice
- Join Date
- Jun 2013
- Location
- Adelaide
- Posts
- 13
Plywood tongue and groove flooring
Hi,
Im quoting a large raised foor / deck to be built under a large roof inbetween some small office pods.
We arr looking at using gunnersens 19mm tongue and groove plywood as the deck for various reasons - quick and easy to install, we want a semi industrial look etc.
I was thinking about using something from the sikkens range to coat it.
Does anyone have experience in coating something like this for a fairly well used walk way?. We are the main lease holder and i dont want to have to recoat it constantly or it wear out and look shabby.
We have to have a raise deck for pipework so our only other options are a raised paver set up or standard decking or similar.
Cheers!
Sent from my SM-G950F using Tapatalk
-
6th December 2018, 11:17 AM #2
SENIOR MEMBER
- Join Date
- Dec 2010
- Location
- Melbourne
- Age
- 79
- Posts
- 489
I would use one of the decking finishes