![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
30th September 2009, 11:20 AM #1
FIXING 108x19 VIC ASH BOARD TO YELLOW TOUNGE FLOORING
Hi all,
I am about to start laying floor boards which are 108 x 19 VIC ASH (tasmanian oak) and was wondering what is the best way to lay it?
A - Secret nail only ?
B - Secret nail and beads of glue every 300 ctrs perpendicular to boards?
C - Glue all the way under boards and nail ?
any advice would be appriciated.
thanks
stefan
Read the full thread at RenovateForum.com...
Similar Threads
-
yellow tongue flooring
By Reno RSS Feed in forum FLOORINGReplies: 0Last Post: 6th September 2009, 07:30 PM -
Yellow Tounge over Floor Joist & Beares /
By PlasterPro in forum FLOORINGReplies: 2Last Post: 18th September 2007, 09:12 PM -
Putting yellow tongue particle flooring over existing flooring
By buggy in forum FLOORINGReplies: 3Last Post: 24th June 2007, 03:15 PM