Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2008
    Location
    Inglewood
    Posts
    0

    Default What finish for Tassie Oak Dining Table?

    Hi all,

    In process of making a new dining table (the previous one is too small now says the wife!), out of Tassie Oak. Can anyone suggest what finish I should use on it, I'm after water based, one or two pack, gloss finish and of course, hard wearing?

    Thanks, western woodie

  2. #2
    Join Date
    Nov 2010
    Location
    Perth W.A
    Posts
    76

    Default

    There are numerous options,
    You, could use, water based varnish, wipe on poly, oil finish, spray on 2 pack lacqeur, to name but a few.
    Would steer well clear of any kind of gloss finish as it will look cheap and nasty in my opinion.

    Probably would sway towards oil finish or wipe on poly if you are doing it at home.and dont have spray gear.

    If, you want a good spray finish you could ask David Howlett at The Perth wood school in Belmont.
    Goes by the name of "Marginata" on here but best contacted by phone or email.

  3. #3
    Join Date
    Mar 2008
    Location
    Townsville, Nth Qld
    Posts
    102

    Default

    Livos have a good oil based product for counter tops that is good for temperatures up to 50degC. I have used it on HUon Pine coasters with great success. Used for hot cups of tea and soup on the dining table
    regards,

    Dengy

  4. #4
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    0

    Default

    sorry, but you need a water bassed finish on a dinning tabe like a hole in the head.......unless you are going to spend a lot of money.. water based finishes simply do not have the durability or hardness required for a dinning table.

    If you are concerned about toxisity.......watter bassed fnishes require care inn this matter no less than other finishes.

    a good oil bassed finnish is what ya needing I would tend to an oil resin blend

    cheers
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

  5. #5
    Join Date
    Feb 2011
    Location
    Melbourne
    Posts
    206

    Default

    Thank you for the lovely words about the Livos countertop,it is always good to hear from those who have used the products. As Denguee mentioned, the Kunos Counter top oil has the added benefits of being heat resistant to 50 degrees, this is able to withstand direct contact with hot cups, plates etc. The Kunos oils are also certified food safe so can be used with confidence on tables, bench tops or chopping boards etc that come in direct contact with food.
    The Livos oils are penetrating oils, leaving no layer on top to become brittle and restrict the timber and they will highlight the natural colour and grain of the timber. Whilst they are durable they are also natural so can mark through contact with chemicals, however these marks can be quickly and easily spot repaired as well as rejuvenated if necessary. Coatings that leave a layer on top really look great until the first scratch appears.
    Livos Australia

    <O</O

Similar Threads

  1. Oak dining table - the right finish?
    By NZStu in forum FINISHING
    Replies: 9
    Last Post: 5th November 2011, 02:20 PM
  2. Replies: 3
    Last Post: 13th June 2011, 04:46 PM
  3. Finish for dining room table.
    By Goldy in forum FINISHING
    Replies: 1
    Last Post: 18th October 2009, 09:59 AM
  4. Dining table top re-finish
    By vjc21 in forum FINISHING
    Replies: 2
    Last Post: 3rd January 2005, 07:10 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •