![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Spotted Gum Side Tables
-
21st January 2012, 01:09 PM #1
New Member
- Join Date
- Aug 2009
- Location
- bonnells bay
- Posts
- 2
Spotted Gum Side Tables
My partner has just finished making 2 beautiful bedside tables out of spotted gum. Now we are trying to decide what to finish it with. They will be bedside tables and we will have drinks etc on them so we need them to be protected to a certain extent - also want something which is not going to scratch too easily (not that we will be roughhousing them or anything!!). Would appreciate some advice on a finish that will show off this beautiful timber.
Thanks a lot in advance!!
-
21st January 2012, 03:07 PM #2
I finished a spotted gum hall table in Danish oil and it looks great. It's also very easy to apply.
An oil finish will be much easier to fix if it gets scatched than say a poly finish.
Use coasters under your drinks and you shouldn't have any problems.
Kev
-
21st January 2012, 03:10 PM #3
New Member
- Join Date
- Aug 2009
- Location
- bonnells bay
- Posts
- 2
Hi Kev,
Thanks for sharing your experience, did you need to use a sanding sealer is the next question?
Ps I hate coasters but I KNOW i should use them!!
-
22nd January 2012, 08:48 PM #4
I didn't use sanding sealer. Just make sure you have sanded through the grits up to at least 400, then apply 2 or 3 coats of oil as per the instructions on the can.
You should re-apply with oil every 12 months.
Coasters - now there's an idea for your next project
Regards
Kev