am putting in a shower cubicle in the corner of the garage and am going to stud up the brick wall so I can run the pipes between the bricks and the villaboard. It will have its own hot water system and water tank as its a long way from the other side of the house where there is water available.

Now the questions :)

  1. Do I use poly pipe from the water tank to the cold or convert it to copper somewhere along the line?
  2. Can I use poly for hot water?
  3. I am guessing I will have to use copper for the hot (and maybe cold) can I use the compression fittings with the olive behind the walls as someone once told me these dont last forever and leak and its best to use the soldered fittings.




Read the full thread at RenovateForum.com...