![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: header for cavity slider
-
17th July 2012, 10:30 PM #1
header for cavity slider
Hi,first post - long time lurker.Im installing a cavity slider (820mm door) unit its a hume doors statesman model.The wall its going in has no load on it at all not even ceiling so the only load above the door is a few hundred mm of gyprock and its frame.Im guessing it doesnt need much of a header over it (would you call it a lintel?) but i would like some advice on how big it should be.Ive got plenty of hardwood that were the studs in the wall so i thought i could reuse 1 or 2 of those as the header. Is that going to be enough?Thanks for any advice.
Read the full thread at RenovateForum.com...
Similar Threads
-
cavity slider and towel rail
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 21st September 2010, 06:10 PM -
Cavity slider opening width.
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 29th March 2010, 09:20 PM -
Cavity slider Door
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 7th December 2008, 10:10 AM -
Cavity slider doors
By ubeaut in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 16th November 2008, 07:21 AM -
Cavity Slider Instal problems
By GMC in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 8Last Post: 11th November 2007, 05:22 PM