![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Window Extractor Fan
-
16th November 2008, 07:10 AM #1
Window Extractor Fan
The old Xpelair extractor fan in our kitchen threw and chewed a couple of louvre blades, and now rattles. As its over 20 years old it was probably due for replacement anyhow.
The old fan fits a window cut-out of 260mm diameter. A visit to a couple of electrical dealers showed fans to fit a 230mm cut-out, but nothing for a 260mm hole. Putting the smaller fan in provides only about 3mm overlap of the mounting plates over the glass - this seems way too little.
Does anyone know who makes fans to fit a 260mm hole? Or another solution?
Thank you
Graeme
More...
Similar Threads
-
window sil in sash window
By glenn k in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 5Last Post: 2nd November 2003, 06:54 PM