![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
-
14th November 2008, 09:23 AM #1
New Member
- Join Date
- Nov 2008
- Location
- Sydney
- Posts
- 2
How do I test a varnish is oil or water based
I am refurbing some interior western red cedar joinery where the exsting satin finish has worn off all of the sun facing surfaces, but intact in others. I have no idea what varnish was originally used. Ideally I don't want to have to sand the whole lot back to the wood, and am hoping to just overcoat the existing surfaces.
If this is good idea (?) how do I test whether I need to use an oil vs water based coating?
Cheers
-
14th November 2008, 01:33 PM #2
If on holding a rag dipped in meths on to a painted surface the paint becomes a little soft, then it is an acrylic paint. Presumably the same would aply to varnish although I have not tried it on varnish myself.
Rhys
-
15th November 2008, 10:04 PM #3
Yep , if you rub the current finish with a rag soaked in meths, if the existing varnish is oil based, then nothing should happen other than it will clean the finish. If the "varnish" rubs off or softens as mentioned above, then it is water based or acrylic type varnish.
Removing the old finish is, of course, the best way to achieve the best results but you should get a reasonable finish if you sand back the existing surface nice and smooth.
I would use a mat or low sheen finish so as not to highlight the underneath surface if it is not perfect. Unfortunately, the finish you achieve is dictated by the preparation you do prior to applying the finishing coats.Reality is no background music.
Cheers John
-
17th November 2008, 07:51 AM #4
New Member
- Join Date
- Nov 2008
- Location
- Sydney
- Posts
- 2
Thanks lads. Based on my experiences to date with this restoration, more sandpaper will be required!
Similar Threads
-
Water based Vs Oil based paint on Weatherboards
By Make it work in forum PAINTINGReplies: 5Last Post: 21st December 2007, 12:40 AM -
Water Based vs Oil Based
By winki in forum FLOORING, DECKING, STUMPS, etc.Replies: 6Last Post: 12th June 2007, 07:17 PM -
oil based stain and varnish
By joseph84 in forum FINISHINGReplies: 4Last Post: 5th January 2006, 12:26 AM -
Is Water Based Polyurethane water proof when dry?
By Alfred in forum FINISHINGReplies: 6Last Post: 23rd October 2005, 12:39 AM