![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
Thread: G'day Mates
-
1st November 2012, 04:33 AM #1
New Member
- Join Date
- Nov 2012
- Location
- Gladwin Mi, USA
- Posts
- 1
G'day Mates
I'm Dale Maxim and a woodworker from Gladwin Michigan. I build just about anything including the house we live in, but I'm currently into open segmented turning. I also have a Zen CNC router that I built and a Jon Magill Rose engine that I built and upgraded. I would call myself an intermediate woodworker and turner. I also fly RC electric planes and am an avid golfer ( live on a golf course). I have a wife, Carla, who puts up with me and 2 grown sons. I look forward to learning some things on your web site forum.
-
1st November 2012, 09:02 PM #2
welcome to the forum
Regards Michaelenjoy life we are only here a short time not a long time
-
1st November 2012, 09:05 PM #3
SENIOR MEMBER
- Join Date
- May 2011
- Location
- gippsland
- Posts
- 82
welcome from down
under!
-
1st November 2012, 11:34 PM #4
Gidday Dale & welcome to the forum
-
2nd November 2012, 09:31 AM #5
Welcome to the forum.
-
3rd November 2012, 08:58 AM #6
G'Day & Welcome "Down Under" Dale,
You're up in the cold rim of the USA; hope your basement is heated.
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
Enjoy the forum.
Enjoy your woodwork.
Cheers from "On Top Down Under" Crowie
PS - I hope all of your friends & family are safe after last weeks storm....
-
3rd November 2012, 09:09 AM #7
G'day Dale, welcome to the forum, enjoy your stay.
Hope you get something out of it.
If you want to see some great segmented turnings do a search for entries by Powderpost, his work is amazing.
Cheers, Ian"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
4th November 2012, 07:13 AM #8
welcome to a top forum
Similar Threads
-
G'day, mates!
By Woodendy in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 8Last Post: 11th December 2012, 04:41 PM -
G'day mates
By Cespit in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 4Last Post: 12th April 2012, 05:49 AM -
G'day Mates
By SupafastR in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 1Last Post: 5th April 2010, 07:21 PM -
G'day mates
By davbren in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 5Last Post: 28th November 2009, 12:59 PM -
G'Day Mates
By Todd Glover in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 6Last Post: 21st November 2008, 09:17 PM