![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Parks Super Glaze Problem
-
29th September 2010, 11:29 AM #1
New Member
- Join Date
- Sep 2010
- Location
- RI
- Posts
- 2
Parks Super Glaze Problem
Hello
I am finishing a table with Parks Super Glaze. While the glaze was drying my garage door was opened during a rain storm. the rain dripped thru the door seams onto my just poured table leaving a number of holes where the water drops displaced the glaze. Anyone have any ideas on how i can smooth the table and refill the holes?
-
29th September 2010, 01:22 PM #2
New Member
- Join Date
- Sep 2010
- Location
- dubois indiana
- Posts
- 1
i would love to help ! you can use rough sandpaper to get most of it off as long as you dont sand through the superglaze into the wood. then be shure to wipe it clean ! ive found that nomatter the roughness of the sandpaper it will still be unnoticable when coated again. if there are any holes left fill them first and get the air bubbles out. then repeat what you did before it rained and be shure to keep your garage dore closed.
-
30th September 2010, 11:54 AM #3
New Member
- Join Date
- Sep 2010
- Location
- RI
- Posts
- 2
what do you wipe it down with?
Similar Threads
-
Questions about sealing paper on wood under super glaze
By ZoominIroc in forum FINISHINGReplies: 8Last Post: 11th June 2009, 08:10 AM -
Replacing single-glaze with double-glaze
By zok in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 3Last Post: 17th April 2007, 03:11 PM -
German Car Parks
By fred.n in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 2Last Post: 19th May 2006, 11:44 AM -
National Parks
By oges in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 4Last Post: 7th December 2004, 09:03 PM