![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
27th April 2012, 06:20 PM #1
Choosing a garage company Ranbuild Sadich or Safety Steel
Hi there
Looking for a bit of advice, I am currently pricing some suppliers for a double garage 7.5 * 14.4 metres from Ranbuild, Sadich and Safety Steel. Pricing is that Safety Steel is cheaper, Sadich then Ranbuild, but it is stated that Sadich and Ranbuild use Australian BlueScope steel and the implicationis that SS is sourcing their steel from elsewhere. I have seen the SS post tubing and it is labelled Australian tube mills. As for the sheeting SS does not have colorbond color samples, but an equivalent colour scheme.
If you have any of these companies products would you recommend them and how long have you had one of their sheds.
Ranbuild seem to have a good reputation but I have not heard much about Sadich.
Question about Roller doors, some people tell me that BND Roller doors are now not the same quaility that they once were and I am looking at Stramit because they have an extra 100 mm clearance in their domestic range. 3100 high * 3050 wide. Are these good quality doors?
Thanks for any information
Kevin
Read the full thread at RenovateForum.com...
Similar Threads
-
Choosing a 2nd hand panel lift garage door
By ubeaut in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 16th November 2008, 07:21 AM -
Wiring Steel Garage
By GlennLogan in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 8Last Post: 9th August 2005, 10:28 PM