![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 13 of 13
Thread: What wall sheeting is that?
-
1st August 2006, 10:06 PM #1
New Member
- Join Date
- Aug 2006
- Location
- Melbourne
- Posts
- 3
What wall sheeting is that?
G'day renovators.
I'm desperate to find out what sort of sheeting I have in my house.
It's a 1950s Melbourne house on posts.
I'll try and describe the (interior) walls in the hope that someone will be able to tell me what they're made of.
The walls are sheeted, with thin timber strips running vertically up the walls covering the joints of the sheets. The surface is not perfectly smooth like Gyprock; it's got an uneven surface like if you were to paint over...I don't know...heshan, bread. It's hard to describe, but it's got a slightly textured surface.
Also, it's soft. Kind of like the feeling of cork. You can press into it if you press pretty hard.
And lastly, when you sand it back past the outer coating, it's a lightish brown. And looks a bit like wood.
I know that's a long winded and fairly strange description, but I'd really appreciate it if one of you recognises it and can tell me what it might be.
Thanks in advance.
-
1st August 2006, 10:11 PM #2
quality + reliability
- Join Date
- Jul 2006
- Location
- Melbourne
- Posts
- 675
-
1st August 2006, 10:32 PM #3
SENIOR MEMBER
- Join Date
- Feb 2006
- Location
- Melbourne
- Age
- 65
- Posts
- 499
A picture paints a thousand words!!.
-
1st August 2006, 10:44 PM #4
Unlikely I'd have thought but it could be masonite sheeting with the textured side out rather than the smooth side.
Cheers.................Sean
The beatings will continue until morale improves.
-
1st August 2006, 11:50 PM #5
Have to agree with Rod, canite is about the only thing that's soft enough to press in with your fingers. It was used on some walls in the 50's
-
2nd August 2006, 10:51 AM #6
quality + reliability
- Join Date
- Jul 2006
- Location
- Melbourne
- Posts
- 675
Yes Bob that was my thinking. I don't know of any other product that you could depress by pressing on it, that fits the other parts of the description.
Great plastering tips at
www.how2plaster.com
-
2nd August 2006, 06:46 PM #7
New Member
- Join Date
- Aug 2006
- Location
- Melbourne
- Posts
- 3
There's nothing like Internet forums to get great and fast info! Thanks heaps for all the replies. I'm liking the sound of this canite; I was concerned it may have been some sort of asbestos stuff. Was canite used much in the 50s in Melbourne? It's all over the walls and ceilings of my place.
I'll try and attach a picture. Please let me know if it looks like canite.
Thanks again for all the help.
-
2nd August 2006, 07:02 PM #8
quality + reliability
- Join Date
- Jul 2006
- Location
- Melbourne
- Posts
- 675
Its a bit hard to tell from the pic's. If you had a photo of a cross section it would be better.
Canite is a bit like an old pin board. It is soft wood pulp made into a sheet. It had a stiple painted face and the back was plain. It was not that widely used a wall lining, but more of a ceiling lining, as it was easily damaged.
It was used a lot in older schools for ceilings, as it also had sound absorbing qualities. It cut down on the reverberation in a class room that otherwise had hard surfaces everywhere.
Cheers RodGreat plastering tips at
www.how2plaster.com
-
2nd August 2006, 07:22 PM #9
-
5th August 2006, 08:30 AM #10
Looks like Canite
Thinking about mowing the lawn doesn`t get it done !
-
5th August 2006, 11:02 AM #11
Originally Posted by rod@plasterbrok
Mick - living in sugar cane country"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
5th August 2006, 04:41 PM #12
quality + reliability
- Join Date
- Jul 2006
- Location
- Melbourne
- Posts
- 675
Hey, thanks for that info Mick,
I didn't know that.
That is what I like about this forum, there is always someone out there that knows.
CheersGreat plastering tips at
www.how2plaster.com
-
6th August 2006, 01:42 PM #13
New Member
- Join Date
- Aug 2006
- Location
- Melbourne
- Posts
- 3
Thanks very much for that, fellas. Much appreciated.
Similar Threads
-
Rendering a wall - how to
By Big Clint in forum RENDERINGReplies: 15Last Post: 15th January 2009, 11:19 AM -
Retaining Wall
By Flyboy in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 3Last Post: 12th February 2006, 08:00 AM -
Cutting a window into an internal brick wall
By dalejw in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 4Last Post: 11th January 2005, 08:00 PM