![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 11 of 11
Thread: branding iron??
-
4th November 2012, 11:17 AM #1
branding iron??
i need a couple of branding irons made up and thought posting here may find someone that can help
the size is approx 80mm long and the height of the letters -i would imagine 4mm plate [i have some]
14 characters in one [inc a space] and the other 7 characters
i am working on a project that needs some names burnt into a piece of vic ash
the idea is to cnc them onto a mild steel plate and tack them onto a bar for a handle
the letters would need to stand up from the plate like embossed not in relief
it could be in brass - i think it has a high enough meting point to burn the lettering into a piece of wood -
attaching a handle may be more difficult with brass like for eg you couldnt solder it on
thanks in anticipation for any help on this oneray c
dunno what's more fun, buyin' the tools or usin' em'
-
4th November 2012, 01:54 PM #2
Member
- Join Date
- Jul 2012
- Location
- Perth
- Posts
- 9
I used to make many of these. Used 6mm engravers brass and silver solder to a rod for the handle.
Only ever use a gas torch to heat it and not an oxy like one customer tried. A big plumbers soldering iron works quite well.
Mike
-
4th November 2012, 02:09 PM #3
GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 1,087
Try Martin from Art, Design Make. He's made several brass irons for me, all at more than reasonable prices:
Art, Design Make by Martin Vinnicombe-Scott
-
4th November 2012, 02:38 PM #4
sorry most of our machines have a hard time cutting aluminium
how come a 10mm peg dont fit in a 10mm hole
-
5th November 2012, 08:07 PM #5
Senior Member
- Join Date
- Nov 2008
- Location
- Far North Queensland
- Posts
- 103
I wonder if aluminium would be good enough to do this, I know that any spilled molten aluminium instantly charcoals my timber moulding boxes upon contact, they end up quite charred after a while.
I know that you wouldn't want to get them to melting point but it may burn well enough to suit your needs.
A casting of what you want would be easy enough to make, with the right tools, I am currently waiting on some better foundry sand, will be a couple of weeks away, if you are still stuck by that time let me know and I can try a test run.
If it looks like working I can include it an a batch, and once I have the new sand I intend to do a LOT of batches, lol.
Cheers.
Russell.
-
5th November 2012, 08:44 PM #6
Senior Member
- Join Date
- Nov 2008
- Location
- Far North Queensland
- Posts
- 103
I just read your initial post again, do you mean 80mm in total length including 14 characters?
That may be a little too fine for normal sand casting, though I am playing around with other methods that may work, if I have any luck I will let you know, otherwise just straight out machining a small aluminium block would most likely be the simplest option, if it can be made hot enough for the job required.
Russell.
-
5th November 2012, 11:25 PM #7
-
14th November 2012, 05:34 PM #8
got a couple done by john who is a member here and a nice bloke
great job, very fast, excellent quality
his website is here
Labels Extreme - Your one stop label shop for all your engraved label needs.ray c
dunno what's more fun, buyin' the tools or usin' em'
-
14th November 2012, 11:22 PM #9
-
15th November 2012, 07:39 AM #10
i had two cut in brass - beautiful job for $110 - sent the brass Friday had the job back wed
ray c
dunno what's more fun, buyin' the tools or usin' em'
-
15th November 2012, 07:51 AM #11
Saw dust maker!
- Join Date
- Sep 2006
- Location
- Wandong
- Age
- 60
- Posts
- 0
Thanks Ray, it was nice to do work for you.
I'm glad I could help out!