Results 1 to 8 of 8
  1. #1
    Join Date
    Oct 2007
    Location
    East Doncaster
    Posts
    10

    Default Decking template

    Hello all,

    I'm just about to take delivery of my decking boards (90mm x 19 mm) and am wondering if anyone can give me some advice in making a template for drilling pilot holes for nailing? I'm thinking of a 3mm-4mm gap between baords.
    Cheerio,
    Mark

  2. #2
    Join Date
    Dec 2004
    Location
    Hell with fluro lighting
    Age
    55
    Posts
    624

    Default

    Take one offcut of decking board, nail a peice of 3mm MDF twice as wide as the decking board, to each side.

    Stack on top of your first board, Line up the ends of the two boards, Drill through both boards. one throwaway drilling and spacing template made.

    Well thats how I would do it anyhow.
    I may not have gone where I intended to go, but I think I have ended up where I needed to be.

    My Other Toys

  3. #3
    Join Date
    Jan 2007
    Location
    Melbourne
    Posts
    18

    Default

    Anyone have any pictures, it sounds like a great idea but i can't picture it, i'll be needing something like that very soon.
    Last edited by want2learn; 30th November 2007 at 07:41 PM. Reason: spelling

  4. #4
    Join Date
    Nov 2007
    Location
    Melbourne, Victoria
    Age
    52
    Posts
    168

    Question Decking screws nice and straight - HOW???

    What about getting all the screws in a straight line looking nice and neat. What's the method there?
    All decks should be stained....black white black white black white.......after all it would match anything!
    All roofs should be covered or tiled.....black colorbond, silver mist, black colorbond, silver mist, black colorbond.........after all, we wouldn't want a mismatch!

  5. #5
    Join Date
    Oct 2007
    Location
    Sydney, Australia
    Posts
    65

    Default

    I'd suggest that consistent staggering is better. It certainly reduces the risk of a joist opening up along a single line.

    Cheers, Adam.

  6. #6
    Join Date
    Oct 2003
    Location
    Canberra
    Age
    48
    Posts
    318

    Default

    I went through this same issue a few years ago. Check out this trhead - it has a jig I made up to help me with the driling to get my mails in a straight line.

    http://www.woodworkforums.ubeaut.com...highlight=deck

    Hope it is helpful

    Trav
    Some days we are the flies; some days we are the windscreen

  7. #7
    Join Date
    Nov 2007
    Location
    Melbourne, Victoria
    Age
    52
    Posts
    168

    Cool Thanks.

    Trav,
    I printed off the template drawing. When I'm ready i'll bang it together.
    Cheers bud,
    Doc.
    All decks should be stained....black white black white black white.......after all it would match anything!
    All roofs should be covered or tiled.....black colorbond, silver mist, black colorbond, silver mist, black colorbond.........after all, we wouldn't want a mismatch!

  8. #8
    Join Date
    Oct 2003
    Location
    Canberra
    Age
    48
    Posts
    318

    Default

    No worries. Hope it is ueful for you.

    Trav
    Some days we are the flies; some days we are the windscreen

Similar Threads

  1. Decking boards
    By Mark CH in forum DECKING
    Replies: 4
    Last Post: 14th November 2007, 05:09 PM
  2. Turning decking timber upsidedown?
    By Paul Fitchett in forum DECKING
    Replies: 5
    Last Post: 15th February 2007, 10:12 PM
  3. Feedback on decking project
    By nmilne in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 6
    Last Post: 9th January 2006, 10:44 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •