Page 1 of 2 12 LastLast
Results 1 to 15 of 29

Thread: Pool deck

  1. #1
    Join Date
    Mar 2009
    Location
    Sydney
    Age
    37
    Posts
    3

    Default Pool deck

    G’day forum,

    The house that we bought came with a pool. The first few years I maintained it well, but the last year and a bit I had an absolute gut full of the thing. The pump started to play up amongst other issues. I was close to getting it filled in but decided to keep it, especially with my 18 month old at the age where she will really enjoy it.

    I’ve sorted out a new pump, acid wash clean etc so the pool will look really nice, but I’d like to do something with the pool surround. I don’t like the pavers that are there at the moment, they are uneven and require regular high pressure cleaning to make them look half decent. I spent quite a bit of time a while back fixing some of the pavers and making them level, but it really needs to be done all over.

    My initial idea was to rip them up, paint them in a paving paint and lay them down randomly with pebbles in between. Then I thought about a deck around the pool. It seems like it wouldn’t be all that difficult and I could do it myself. I may even use composite jarrah decking so maintenance is a breeze.

    Any way, I have a few questions as I’ve never done this sort of thing before.

    I was going to rip up the pavers, build a frame with 450mm on centre joists then lay the deck. Does it really matter which way the deck is running? And would I need to slope it away from the pool?

    And do you think it’s a feasible job for one person? I have a tendency to under estimate projects.

  2. #2
    Join Date
    Nov 2003
    Location
    Sydney
    Age
    54
    Posts
    891

    Default

    Andy, I am confident that you can do It yourself and you will do it well. It will take a little while but you can do it. Modwood is a good choice too.
    Visit my website at www.myFineWoodWork.com

  3. #3
    Join Date
    Mar 2009
    Location
    Sydney
    Age
    37
    Posts
    3

    Default Pool deck

    Here is a pic of the pool.

    Would the frame and joists need to be set in concrete or would I need something like a deck block? Or will it be rigid enough once all screwed together?

    Just trying to work out if I’m out of my league here.

    IMG_5076.JPG


    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    Mar 2009
    Location
    Sydney
    Age
    37
    Posts
    3

    Default

    Quote Originally Posted by Wongo View Post
    Andy, I am confident that you can do It yourself and you will do it well. It will take a little while but you can do it. Modwood is a good choice too.
    Thanks mate, I’ll check modwood out.

  5. #5
    Join Date
    Sep 2010
    Location
    Sydney
    Posts
    267

    Default

    If anyone can start something and finish it well it’s you.
    Id suggest that RWbuild can give you some tips.

    My experiences at work suggest that having a plan to keep the pool gate/ fence secure with little ones around would be important

  6. #6
    Join Date
    Mar 2009
    Location
    Sydney
    Age
    37
    Posts
    3

    Default

    Quote Originally Posted by Pac man View Post
    If anyone can start something and finish it well it’s you.
    Id suggest that RWbuild can give you some tips.

    My experiences at work suggest that having a plan to keep the pool gate/ fence secure with little ones around would be important
    Thanks Paul. I won’t be doing anything to the pool fence/gate, it’s just removing the pavers and putting a deck in place.

  7. #7
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Just thinking through the process that I did when I built my shed deck. I started with concrete pads about 350x350, which are about 100mm high, but also have a "belly" going down into the ground perhaps 60-80mm. They have some reo steel in them. I got them as close as I could to the correct height and then just adjusted with "packers" which are in different thicknesses 1.5, 3, 5, 8 mm (you can buy a mixed box for not much).



    They are at 1500 centres. Bearers (4x3 hardwood in my case) went on to the pads, again at 1500 centres, and then treated pine joists went onto the bearers at I think 450 centres. Where I'm going to there is that the total depth required from ground to top of deck is
    100mm pads
    100mm bearers
    90mm joists
    20mm (?) modwood
    Total 310mm

    You want a reasonable clearance between the ground and the bottom of the bearers. I have 100mm (thickness of the pads), and you wouldn't want the pads too much thinner than that.

    So you would have to dig down 310 - 50 (paver thickness) = 260mm below the current bottom of the pavers, if you were doing the same construction. You would also have to ensure that the earth surface that you finish can drain away water because it can't just run off the edge of the pavers as it currently does (not a particularly difficult thing to do, btw).

    Digging down will produce quite a bit of waste fill to be disposed of.

    I did coat the bearers with erzatz creosote, but as you know it is not exposed to direct rainfall. In your case I would be inclined to at least paint the bearers and joists with three coats of paint BEFORE laying them, and then use the specialist plastic strip to cover them (can't think of it's name now, but Ray will). Basically try to keep as much water as possible off the joists and bearers.

    When it came to building the woodstore shed, I change the pad technique slightly. I pre-cast them using 200mm and 250mm water pipe. They are flat top and bottom. Really easy to make.



    As Paul says, Ray will no doubt have excellent advice for you, and might have a simpler construction technique than mine.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  8. #8
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Btw, I agree with Wongo on the Modwood - the last thing you want to do is have timber exposed to sun and pool water. You'll just be (expensively) changing one form of maintenance for another.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  9. #9
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    Andy, you walked on Modwood when were at my place and we went downstairs from the workshop to inspect the sewing room. It is 20 years old and was the first generation and you can see it has worked out well for wear and general durability. The deck that surrounds our pool I built on my own the first time and yours is a doddle compared to that. I would not use either Modwood or hardwood around a pool, the Modwood gets too hot and the hardwood as it get older could splinter and injure feet. Treated pine is still my choice even though mine lasted about twenty years and we had to pull it back to the hardwood bearers and totally rebuild it. Use stainless screws when you do it and you can always get them out when needed. I think it was about 3,500 screws in mine including the fence and they aren't all that expensive bought in bulk lots. If you use Modwood I would go for smaller bearer/joist centres as it does flex a bit more than pine and a lot more than hardwood.

    The plank direction is very important around a free form shape pool as you can cut the ends in to the wall at the best angle, in other words perpendicular to the pool. Laid the other way and it would be just about impossible to get the planks long ways and snug to the walls of the pool. I made spacers to get the planks even from 5mm thick material which saved a lot of mucking around. Brett made/has? a water level or if you want I have a laser level you can use.

    As for acid washing I went another way, my son got in the pool with a high pressure washer and blasted it but it can be a long process because the water becomes very murky. The biggest issue is how far down do you have to excavate to get the clear space for the deck to be flush with the pool combing and what sort of soil is it. When the pool gets used by a herd of kids the deck takes a pounding and the piers will want to be deep enough to resist but providing there are no rocks in the way a small borer will put piers down deep enough for that.
    CHRIS

  10. #10
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Quote Originally Posted by Chris Parks View Post
    the Modwood gets too hot
    Use stainless screws when you do it and you can always get them out when needed. Yup - Mitre 10 has them cheap, Bunnings prolly do too.
    smaller bearer/joist centres as it does flex a bit more than pine and a lot more than hardwood.
    I was nearly going to say that I thought Modwood might get hot - in the dark colours anyway. Here are some colours, and Sahara appears to be the lightest - "brushed" would be best for a wet area.

    On Chris's suggestion about smaller distances between joists - it doesn't cost too much extra to do that. You could even do joists at 300 centres for not a whole lot extra money, and you don't necessarily have to screw into each joist - every second one (for 300 centres) would probably be enough, and if there are any bouncing boards you can screw them down later.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  11. #11
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    75
    Posts
    832

    Default

    G'Day Andy

    Critical question, is the pool concrete or fibreglass?
    The property next door on the left, how far is their land below your existing paver level?
    The person who never made a mistake never made anything

    Cheers
    Ray

  12. #12
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    I am fortunate that I can buy well made SS screws from a few different specialist fastener suppliers at what I reckon are reasonable prices, under $10/hundred box the last time I did it and I might have a better source now but I haven't tried him.
    CHRIS

  13. #13
    Join Date
    May 2007
    Location
    Gold Coast
    Age
    71
    Posts
    456

    Default

    The existing pavers look to be concrete. Have you considered ripping them up and relaying kiln fired clay pavers? It's my experience clay pavers don't collect the dirt as significantly as concrete pavers and look a lot better all the time. Properly laying new pavers (using a plate compactor and new sand) would be easier than building a deck and wouldn't alter the finish height much.
    Franklin

  14. #14
    Join Date
    Mar 2009
    Location
    Sydney
    Age
    37
    Posts
    3

    Default

    Alright, I’ve done quite a bit of research over the past 24 hours. To do the deck properly I’d be looking at easily over $3000 in materials plus I’d have to find time to get around to build it before December.

    I think I need to be realistic, and it’s unlikely I’ll be able to finish it in time. I’m spending quite a bit of money getting new equipment in the pool, so it would really annoy me if I have a half finished deck to contend with whilst using it over summer.

    So I’ve decided I’ll stick to my original idea of pavers with pebbles. Sort of like the picture below, but maybe a more random pattern. I’ll paint the pavers that immediately surround the pool, then rip up the existing pavers and either replace them with something that contrasts with the freshly painted pavers, or just paint them the same colour. The missus has a thing about things matching so I’ll need to chat to her about it. I think I’d prefer new pavers.

    This will be much easier and shouldn’t take too long. I’m thinking once the pavers are removed, ill add a weed mat as I’m so over weeding. Then just lay out the pattern I like, add some mortar and drop in the pavers. Adjust and level and move on. Then add the pebbles and that’s it. Any comments on this?

    Cheers

    IMG_5080.JPG

  15. #15
    Join Date
    Mar 2009
    Location
    Sydney
    Age
    37
    Posts
    3

    Default

    Quote Originally Posted by rwbuild View Post
    G'Day Andy

    Critical question, is the pool concrete or fibreglass?
    The property next door on the left, how far is their land below your existing paver level?
    Hi Ray,

    It’s a concrete pool. Not entirely sure how far it is, I’ll get a rough measurement soon.

    Cheers

Similar Threads

  1. Pool Deck
    By Jeff Mills in forum POOLS, SPA & WATER FEATURES
    Replies: 6
    Last Post: 30th August 2010, 02:08 PM
  2. Spa Pool on Deck ?
    By Reno RSS Feed in forum POOLS, SPA & WATER FEATURES
    Replies: 0
    Last Post: 18th May 2009, 02:30 AM
  3. Pool Deck
    By shipsong in forum DECKING
    Replies: 1
    Last Post: 13th May 2008, 11:04 AM
  4. Pool Deck
    By brencarr in forum DECKING
    Replies: 0
    Last Post: 5th June 2006, 05:22 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •