![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: DIY Re-roofing
-
28th October 2007, 03:07 PM #1
New Member
- Join Date
- Oct 2007
- Location
- Perth
- Posts
- 3
DIY Re-roofing
I currently have a clay tiled roof and am wanting to replace it with colorbond (roughly 100m2). Every quote has been too expensive and i can get colorbond at cost prices so have chosen to do it myself with the help of mates.
If anybody has a good knowledge and tips or a good website on how to re-roof with colorbond theyd be greatly appreciated.
I am a sparky so have a pretty good idea on roofing construction etc.
Things like- first sheet to lay, valleys and ridges, sheet size, where to take measurements from to order materials, whirly birds and air cons, pitches, using stringlines etc
Thanks and hope you can help me
-
28th October 2007, 04:17 PM #2
Intermediate Member
- Join Date
- Nov 2006
- Location
- Brisbane
- Posts
- 22
First thing is to make sure the existing battens are ok. eg battens to truss connections and batten spacings.
If you are a sparky you should be able to tee up a roofer to tac the sheets on for you and you finish screwing down.
Install LYSAGHT® Steel Roofing & Walling
-
28th October 2007, 05:16 PM #3
http://www.builderbill-diy-help.com/
http://www.bluescopesteel.com.au/ind...F600C04FCF6B8F
http://www.bluescopesteel.com.au/ind...F600C04FCF6B8F
http://www.homesite.com.au/diy/diy2-...root_id=122257
http://www.pgmgroup.com.au/install.htm
http://www.renovate.com.au/infobase/index.cfm?cat=20
Hope these help.If you dont play it, it's not an instrument!
-
29th October 2007, 03:09 PM #4
New Member
- Join Date
- Oct 2007
- Location
- Perth
- Posts
- 3
Thanks alot fellas, much appreciated
-
30th October 2007, 05:50 PM #5
rob
- Join Date
- May 2007
- Location
- mayland W.A
- Posts
- 137
Hi Wicksy
I got mine done by the roof and wall doctor 200m2 with gutters, insulation and downpipes for $11,000 .
they where $11,000 cheaper than DTS and about $8,000 cheaper than Roof works and the project manager was a great guy and very helpfull he even but a beam in the roof so i could remove a wall at no charge and also removed the old water heater . he does some work for himself so if you need a hand i'm sure he could help
PM's me if you want his number ...
Similar Threads
-
Tips for dIY downlights
By Mr Crow Bar in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 43Last Post: 5th February 2007, 07:31 AM -
roofing / cleaning /repairs
By dzcook in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 2Last Post: 21st June 2005, 11:18 PM