Results 1 to 14 of 14
  1. #1
    Join Date
    Nov 2013
    Location
    Glasgow, UK
    Posts
    2

    Default Hi there, Newbee !!

    We're pretty much on the other side of the world (Glasgow, Scotland, UK), me, my workshop and my lathe, a Milford (made in England) yes yes Milford - not Myford...

    It's a beautiful lathe, in such wonderful condition, but I find very hard to get any info about it anywhere ! So it gets very hard to buy for. I'm looking for a scroll chuck for it, but even the simple task of finding the right thread is a nightmare !
    But it's one of those that is all engineered and beautifully machined...
    So any info, anything would be greatly appreciated...
    Ps: It's not for sale... ! hihi

  2. #2
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum.

    Take a look at the Metalwork section of the forum. Can be accessed via the drop down menu on the top bar or via this link. METALWORK FORUMS

  3. #3
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    Chrisos Christos Christos its a wood lathe Milford

    Hi Cello Girl welcome to the mad house as you see above there is a link to a little bit about the Milford not much there sorry.

    What size is the spindle thread? adaptors can be made and being in an excellent part of the world for good Scottish engineers you might find someone will to assist.

    Give Issac Curran a shout he more local to you then we are and maybe able to help out quicker he has the VB36 which is much like the Milford.

  4. #4
    Join Date
    May 2013
    Location
    Rockhampton QLD
    Age
    69
    Posts
    1,570

    Default

    Welcome to the forum.

  5. #5
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome "to the Great South Land" & to a top forum "Wee Scottish Lassie ".
    There are quite a few members from Scotland & the UK on the forum as well as across the rest of the world..
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP [work in progress] photos with build notes.
    Enjoy the forum.
    Enjoy woodwork.
    Cheers from On Top DownUnder, crowie

  6. #6
    Join Date
    Nov 2013
    Location
    Glasgow, UK
    Posts
    2

    Default Thank you !

    Thanks all of you for the warm welcome !
    I'm sure I'll get there...
    The spindle is 25mm and it very looks like a 8 tpi. Only the other side of the head, for bigger bowls, the thread is different !
    I'll definitely talk to an engineer... probably today...

    Cheers x
    Not really much WIP at the moment, but some of my latest :
    (taking a very short break to see if I can get going on turning...)

    IMG_3283.JPG

    Cello 3 (July 2013)

    IMG_3492.JPG

    Viola 2 (that is a copy of an existing instrument) (November 2013)
    Attached Images Attached Images

  7. #7
    Join Date
    Nov 2013
    Location
    Glasgow, UK
    Posts
    2

    Default

    Oh, and I just had a quick pic at Isaac Curran's website.
    This is really good, and so close to mine (well an hour drive !)
    I'll contact him !... Thanks !!

  8. #8
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    69
    Posts
    0

    Default

    Hi Cello Girl, I am not a woodturner but have a reasonable interest in machinery. I find it strange that there is a mix in units for the info supplied by you, mm for diameter and TPI . But I believe that 1inch 8TPI is one of the fairly common spindle thread standards, and is only 0.4mm diameter off what you stated. I suspect that you should be able to get a chuck to suit fairly easily, or alternatively a commercial adaptor to transition from spindle to a locally available chuck. Don't know what your overall plans are, but if you need to go via adaptor, you might want to consider a chuck that mounts directly to the larger thread on the other end of the spindle and an adaptor to let it mount on the near end. As I said, not a woodturner so might be making rubbish suggestions, but I am confident that 1in 8TPI is one of the standard spindles.

    Hope you enjoy your time with us.

    Mal
    I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.

  9. #9
    Join Date
    Feb 2011
    Location
    Melbourne
    Age
    69
    Posts
    0

    Default

    Welcome aboard. I agree with Mal, sounds like 1" 8TPI. Try this site:
    The Highland Woodturning Club - which has a list of clubs and suppliers who may be able to help.


    Os

  10. #10
    Join Date
    Nov 2013
    Location
    Glasgow, UK
    Posts
    2

    Default

    Dear Mel,
    Thank you for your very useful reply. Sorry for the mix of unit. TBH I'm French and (albeit leaving in the UK) I'm very unfamiliar with Imperial. My calliper that I used for measuring the diameter is in mm but I know that tpi used to identify threads on a lathe like mine would be Imperial... Hence the mix...
    I have suspected the spindle to be 8tpi at one end so that's half of the problem solved as many chucks come in 8tpi, so loads to choose from. For the other end, I planning a visit to a local (lovely, tiny) metalwork workshop and see if they can make an adaptor for me...

    Thank you so much !!

  11. #11
    Join Date
    Jun 2003
    Location
    ...
    Posts
    1,460

    Default

    Also a warm welcome from me.

    Have you been in touch with this crowd as they may be able to help you.


    Peter.

  12. #12
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcome aboard.

  13. #13
    Join Date
    Nov 2013
    Location
    Glasgow, UK
    Posts
    2

    Default

    Thanks again.
    About the nice Milford on lathes.co.uk... Well it's mine ! Poor Tony I called last year to get info on my lathe didn't ever heard of Milford before ! I ended up sending him pics of mine for his database...
    It doesn't look like this anymore (quite) : it's been dusted and professionally reconnected to the mains, I changed the belt so now it runs so smooth !
    It's been cleaned and greased and... Well I've used it since... We still need to get to know each other though...
    I've decided that the bowl end is a 8tpi so today I've bought a Patriot chuck (Robert Sorby) and corresponding insert (left hand).
    The other thread turns out to be 10tpi.
    What I would love to do is turn my own pegs for my instruments (and a few bowls when I'm on holiday !)
    ;-)

  14. #14
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Quote Originally Posted by wheelinround View Post
    Chrisos Christos Christos its a wood lathe Milford

    ......

    Opps

Similar Threads

  1. Another Newbee
    By sparkie54 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 28th December 2009, 04:35 AM
  2. Newbee
    By larry1larry in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 6
    Last Post: 27th December 2009, 12:00 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •