Results 1 to 5 of 5
Thread: Minwax wipe on poly
-
3rd February 2016, 04:13 PM #1New Member
- Join Date
- Mar 2011
- Location
- Bilambil Heights NSW
- Posts
- 0
Minwax wipe on poly
I have some minwax wipe on poly (spirit based) my question is should i keep it in the fridge when not using it? will this help it last longer? Thank you
-
3rd February 2016, 04:55 PM #2SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Perth W.A
- Posts
- 76
Hi I wouldn't recommend storing anything toxic in the fridge.
By all means find a cooler part of the workshop or house,well out of the reach of children if there are any around.
I just store mine in the workshop in a metal cabinet.The problem with the Minwax is that it can build up and congeal around the lid parts due to a not very good design preventing proper closure and shortening the shelf-life.Give the lid a good clean before sealing and storing it.
-
3rd February 2016, 05:33 PM #3
I have had mine for several years and lost about a 1/4 to a 1/3 of the product due to it becoming solid in the can. I used it constantly and as mention the top becomes a bit gummy over time.
I can also mention that another member of this forum had lost almost the whole can due to it become solid.
One suggestion that I have read on this forum was to store finishing products in an esky. I have not done this myself but I do see the logic in trying to not expose it to much to the air. I also think that a steel cabinet would give it better protection as it is after all a flammable item.
-
4th February 2016, 04:24 PM #4GOLD MEMBER
- Join Date
- Aug 2005
- Location
- Queensland
- Posts
- 613
I am the esky person, as well a polystyrene fruit boxes from the local corner grocer. It is not so much for air exposure but to avoid extremes of temperature. For me, they work extremely well. When stored this way I don't see it as a particular hazard as there is no ignition source.
Totally agree with wiping the top, inside and out to avoid the congealing problem. Adding to that, always decant what you need to a container and don't wipe from the neck of the can. I usually decant a little less than I think I need so that I am not tempted to return leftovers to the original can. Better to decant a couple of times than to be stuck with a large amount of leftovers. IMO, leftovers which have been exposed to air as well a possibly dust or bits from your wiper or brush should never be returned to you WOP container.
While on this, I decant into a large glass ashtray, why, shallow, no corners, glass so no metal contamination, easily cleaned, heavy enough to dip or wipe from and not go slipping over the bench, cheap - about $3-$5 at the flea markets.Regards,
Bob
Absence of evidence is not evidence of absence.
-
4th February 2016, 05:06 PM #5New Member
- Join Date
- Mar 2011
- Location
- Bilambil Heights NSW
- Posts
- 0
Thank you all for your reply's they really helped. I live at Tweed Heads in Australia, beautiful part of the country on the NSW QLD border, here it gets fairly humid in summer so in the esky for me. Thanks again
Similar Threads
-
Minwax Wipe On Poly
By Shakie in forum FINISHINGReplies: 3Last Post: 27th September 2010, 10:12 PM -
Minwax Wipe-On Poly
By Bob38S in forum FINISHINGReplies: 7Last Post: 9th October 2008, 09:31 AM -
minwax wipe on poly
By mattym83 in forum FINISHINGReplies: 5Last Post: 1st September 2008, 09:05 PM -
Minwax Wipe-On Poly??
By Mr Brush in forum FINISHINGReplies: 14Last Post: 11th August 2007, 10:49 PM -
Minwax wipe-on poly
By matt1245 in forum FINISHINGReplies: 20Last Post: 2nd February 2006, 08:32 PM
Bookmarks