Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
4th January 2015, 08:10 AM #1
Colorbond Shed - Windows and Door Install
G'day,
I recently bought a house along with a 12 x 10m colorbond shed built by the previous owner. I am pretty sure its a 'Shedboss' shed. It came with 3 uninstalled windows (around 1.5 x 1), and I have purchased a sliding glass door which I want to all install to get some light in there. Its like a cave most of the time.
The guy I bought the door from showed me how he installed his sliding door in his shed, but I want to make sure I have it right before I chop into the walls.
Do I just cut the wall, so that the surrounding lip around the window sits against the inside of the wall?
I know I will have to get some kind of flashing to keep the water off the top of the windows/door. Can you get this stuff straight off the shelf at Stratco or something? How will I flash the sides? Just silicone?
The wall I want to install the door and one of the windows in. Door in the left hand corner, and window near the right hand corner.
Random flashings sitting in the shed. I would have assumed that there would be some kind of flashing for the window included, but cant find anything.
Same wall on the outside.
Read the full thread at RenovateForum.com...
Similar Threads
-
How to make cut out for windows, and how to install insulation/roofing?
By FlyingDuck in forum THE GARDEN SHEDReplies: 16Last Post: 10th October 2007, 03:23 PM