![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 17
Thread: Lathe Accident
-
7th September 2013, 11:16 AM #1
GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 0
Lathe Accident
Operator was wearing gloves per company rules. Glove got caught. This was a metal lathe but a 1 or 2 HP wood lathe will do the same.
We all need to respect our machines & not get too complaisant.
http://www.reddit.com/r/###/comments...ur_hand_stuck/So much timber, so little time.
Paul
-
7th September 2013, 11:33 AM #2
Intermediate Member
- Join Date
- Sep 2012
- Location
- Newcastle NSW
- Posts
- 0
That's pretty horrific. when I was an apprentice one of the other apprentices lost the top of his finger wearing gloves one a capstone lathe 3A etc, in production machining cast bronze. so he was spinning them on and off while running. the bronze was harsh on your fingers but not worth using gloves. I remember I used to put a bit of tape on the tip of my index finger and thumb fro that same reason but the machine I was using was stationary screwing parts on and off.
I try to dissuade guys I work with not to wear rings at work too for the same reason. For me it feels wrong when I start work if I have my ring on.
Jerms
-
12th September 2013, 09:00 PM #3
...Was going to have a big,tasty slice of Angus beef for tea tonight..but after seeing this,i think i'll settle for a banana sandwich instead
..MM
Mapleman
-
12th September 2013, 09:56 PM #4
SENIOR MEMBER
- Join Date
- Dec 2011
- Location
- Buderim qld
- Posts
- 17
Yuk!!!
-
12th September 2013, 11:14 PM #5
Omg
-
13th September 2013, 01:43 AM #6
Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 122
God damn
-
20th September 2013, 09:36 PM #7
Thankful Member
- Join Date
- Apr 2013
- Location
- Goulburn
- Age
- 71
- Posts
- 20
I think the wording (attached thumbnails) above the pics should be changed,
-
20th September 2013, 10:25 PM #8
Paul have you posted this on the US sites like Wood Central? There has been a thread on WOW re wearing gloves they should see this photo - but they can't unless they register on WWF.
-
22nd September 2013, 12:28 AM #9
Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 74
- Posts
- 2,515
Bear in mind that this was a metal turning lathe.
Not trying to diminish it but metal lathes have a lot more torque than ours.
Because most of the work I do would shred the skin to the bone I have always worn gloves and long sleeves.
Don't put your hands past the tool rest unless the lathe is stopped.
-
22nd September 2013, 01:28 AM #10
Given the mess someone made of their hand,
the doctors have done a marvelous job of re-attaching it.
The colour is good so the blood flow is restored.
How useful it will be is another question.
There has been an awful lot of nerve damage.
ps - My daughter (now 17) was quite interested in it.
But she wants to be a doctor.
-
22nd September 2013, 10:11 AM #11
Nice job by the surgeons. I have photos of another metal lathe accident. Bigger lathe, about 600mm chuck, where the operator was wearing a loose jumper that got caught. The pictures are not pretty and the operator didn't survive. Any loose clothing or jewelery around rotating machinery is a to be avoided.
-
22nd September 2013, 02:33 PM #12
Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 74
- Posts
- 2,515
Quite agree.
-
22nd September 2013, 08:42 PM #13
Simply GORESOME!
Craig.
-
23rd September 2013, 08:21 AM #14Try to look unimportant, they may be low on ammo.
-
23rd September 2013, 08:27 AM #15
dont read before breakfast
Similar Threads
-
Car accident
By Allan at Wallan in forum JOKESReplies: 1Last Post: 1st April 2008, 09:29 PM -
Serious Accident
By woodcutta in forum JOKESReplies: 1Last Post: 15th August 2007, 12:51 PM