Results 1 to 3 of 3
  1. #1
    Join Date
    May 2007
    Location
    Williamstown, Victoria
    Posts
    65

    Default Dynabolts - Length?

    I'm bolting down a number post stirrups (200mm in heigh) using M10 Dynabolts. What length should the dyanbolts be, given the deck on really takes weight given its not high off the ground it wont have uplift and/or side forces. The 50mm looked a little short so I went for 75mm in length; however not sure if its overkill? (given i have to drill deeper)

  2. #2
    Join Date
    Mar 2007
    Location
    sydney
    Posts
    228

    Default

    Depends how thick your concrete is.. most people use 50mm but 75 will be better provided your concrete is atleast 100mm thick.. you might find your tightening up a bit if you blow the bottom of the concrete out

    cheers utemad

  3. #3
    Join Date
    Aug 2006
    Location
    Sydney
    Age
    65
    Posts
    1,248

    Default

    I gave up useing dynabolts years ago. They ALWAYS stuff up...well about 1 in 5 do and they rust in no time.

    Its easier to use chemical anchors and stainless studs IMHO.

Similar Threads

  1. Stirrup length
    By JDub in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 2
    Last Post: 5th March 2006, 08:50 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •