![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: Advance lathe
-
10th November 2014, 10:30 AM #1
Advance lathe
Does anyone have a manual or instructions for an advance lathe?
…..Live a Quiet Life & Work with your Hands
-
10th November 2014, 05:50 PM #2
My son has an Advance lathe. I have a few web pages I saved a few years ago. No manual. Is yours plain bearings or taper roller bearings? Although he has left home - the lathe is still in my workshop (sigh!). I will try to work out where I found the web pages, I am sure some were from Tony's site. http://www.lathes.co.uk/advance/ Cheers, Findlay.
-
10th November 2014, 06:46 PM #3
No idea on the bearings as yet.
…..Live a Quiet Life & Work with your Hands
-
10th November 2014, 06:50 PM #4
Senior Member
- Join Date
- Nov 2008
- Location
- Qld. Australia
- Posts
- 417
I have a yet to be put back together (tapered bearing headstock) Advance. No manual that I have ever seen. Was a reasonably good website here on the Advance but it disappeared a few years ago. http://www.titaniumstudios.com/tooljunkie/advance.html There is also this - http://home.iprimus.com.au/stevor/Lathe.htm
Nev.
-
10th November 2014, 08:17 PM #5
The titanium studios page is still around - URL has changed a bit.
http://archives.dcemulation.org/www....e/advance.html
Also found another page (new to me)
http://blog.open-designer.org/?p=31
The one I have access to is a roller bearing headstock. I may have some notes from work we did on it.
Findlay.