Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Rocker roller 3t Gaurd clearance
-
27th April 2014, 06:13 PM #1Novice
- Join Date
- Feb 2012
- Location
- mackay
- Posts
- 15
Rocker roller 3t Gaurd clearance
Hi all,
This week I'll hopefully start building my flat top trailer.
Tray size 2.2x4.8, 3tonne rated,
How much clearance do I need to allow between the tray above and tyres to allow for the rocker rollers to move? Is there a formula ?
-
28th April 2014, 12:26 AM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 2,956
Hi, as a general rule, I use the distance from the axle to the chassis as the distance between tyre and mudguard.
Kryn
-
28th August 2014, 11:57 PM #3Senior Member
- Join Date
- Jul 2013
- Location
- nsw
- Posts
- 118
wheel travel
what have you decided to set it at Sean?
I'm contemplating a flat top build myself, but can't seem to get components cheap!!!
any clues?
meadow
-
5th February 2015, 10:12 PM #4Novice
- Join Date
- Feb 2012
- Location
- mackay
- Posts
- 15
I ended up allowing about 140mm clearance. Looking at all the trailers on the market they look as though there is less clearance than what I used. Hope it works out!