![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
Thread: Ozito earmuffs
-
29th April 2005, 10:38 AM #1
Ozito earmuffs
I went and bought a pair of these (just saw this new forum and decided to plonk it in here) and must admit that I am a bit dissapointed.
I thought the amp and headphones would be a noise cancelling device but, oh no, it just amplifies the noise the machine is making and is a real source of annoyance.
Whilst the volume is down a bit the noise is still irritating.
I finshed up just switching them off and using them as straight Db decimaters.
The question is do I have a faulty set or is this what they are meant to do?Stupidity kills. Absolute stupidity kills absolutely.
-
29th April 2005, 10:43 AM #2
Iain,
clap your hands while you're wearing them, you'll find that the amplification circuit cuts out with percussive sounds. I found mine wouldn't cut out from most machinery noise though, thicknesser, saw etc. I only wear them while knocking up kitchen carcasses. I can hear the radio but it blocks out the nail gun.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
29th April 2005, 11:42 AM #3
I tried that and the router just took off nearly taking my arm off
I'll give it a go in a few minutes when I get out there, Ta.Stupidity kills. Absolute stupidity kills absolutely.
-
29th April 2005, 01:04 PM #4
There was a post about these a few months ago.
They are definately not noise cancelling (would need to be 10 times the price).
What they should do is give you volume control of the noise which can either be below normal or amplified to greater if necessary.
They also cut out above a certain amount of dBs so you don't get exposed to very loud noises.
The idea is you wear them all of the time, turn the volume down when you are doing noisy work and then turn them up if necessary - they just avoid you having to keep taking them on and off.They laughed when I said I was going to be a comedian. They're not laughing now.
Bob Monkhouse
-
30th April 2005, 12:48 AM #5
Originally Posted by journeyman Mick
. Stealing all their nails also works for a awhile...
CheersSquizzy
"It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all" {screamed by maths teacher in Year 8}
-
30th April 2005, 01:02 AM #6
Originally Posted by vsquizz
yeah great, unfortunately it's me using the nailgun
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
30th April 2005, 08:39 AM #7
SPEAK UP I CAN'T HEAR YOU WITH THE MUFFS ON
Tried clapping, didn't work, may be faulty although they seem to cut in and out at random.Stupidity kills. Absolute stupidity kills absolutely.
-
30th April 2005, 12:23 PM #8
G'day all.
I got a set and use them for Pistol shooting.
Work great.
When I am the Range Officer, The gunshot gets cancelled out, But I can actually hear the same shot's echo off of the hill behind the range when the muffs allow sound again.
IMHO...2 thumbs up...
Hooroo.
Regards, Trevor
Grafton