Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2011
    Location
    Wollongong, Australia
    Age
    66
    Posts
    2

    Default "Sticky" jarrah table surface

    Hi all. I have a 20 year old jarrah dining setting. I think the original surface is a polyurethane coating. It has had lots of Mr Sheen on it over the years. It is now quite "sticky". Forearms, newspapers & magazines stick to the surface. Can I use a solvent to fix this, or is it time for a strip, sand & refinish?
    Cheers, Mike

  2. #2
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Try it with a solvent (acetone or spray paint thinners or wax and grease remover) first. If it works, it works, if it doesn't work at least you might remove some Mr Sheen. Get a few rags, pour some thinner on one, wipe small area of surface, discard rag, do again with a new rag. If that has no real effect, get ready to refinish. If refinishing, I'd give it a heavy going over with wax and grease remover (several times) first using the same method, before hitting it with a sander (so you don't contaminate the wood with silicone).

  3. #3
    Join Date
    Aug 2011
    Location
    Wollongong, Australia
    Age
    66
    Posts
    2

    Default

    Quote Originally Posted by Master Splinter View Post
    Try it with a solvent (acetone or spray paint thinners or wax and grease remover) first. If it works, it works, if it doesn't work at least you might remove some Mr Sheen. Get a few rags, pour some thinner on one, wipe small area of surface, discard rag, do again with a new rag. If that has no real effect, get ready to refinish. If refinishing, I'd give it a heavy going over with wax and grease remover (several times) first using the same method, before hitting it with a sander (so you don't contaminate the wood with silicone).
    Thanks Master Splinter. I've been away for a bit. Sounds like a good plan. At least I won't damage the surface with solvents, and if it needs a full refinish (sanding), this solvent stage is needed first anyway.
    Cheers, Mike

  4. #4
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    0

    Default

    Yeh quite often polyU degrades and goes gooey......BTW Mr Sheen is the work of Satin....never allow it in your house or your workshop.

    MR sheen was originally designed for use on lamnate and plastics.....as well as having heap of silicone (which refinshers curse on a daily basis) it also contains an oil and solvent cocktail that may cause problems with a variety of finishes.

    looks like you are up for a refinish no matter which way you look at it.

    And to minimise the problems you WILL have refinishing..yu need to get as much of that gunge off the surface before you begin sanding.

    much of it will scrape off....and if you can take as much that way it will not recontaminate the surface

    cheers
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

Similar Threads

  1. Replies: 7
    Last Post: 17th June 2009, 10:53 AM
  2. Replies: 23
    Last Post: 17th December 2007, 12:49 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •