Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Supplier wanted.
-
28th March 2012, 08:15 AM #1
GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Townsville. Tropical Nth Qld.
- Posts
- 658
Supplier wanted.
Hi all,
Can anyone recomend a supplier that does mail order of small quantities of aluminiun filler rods and Tig electrodes. The local suppliers up here now only do 1kg lots, and full packets of electrodes, which is too much for a hobbiest.
thanks and regards,
Crocy.
-
28th March 2012, 09:19 AM #2
SENIOR MEMBER
- Join Date
- Feb 2010
- Location
- Ballina, NSW
- Posts
- 725
Try bobthewelder.com.au, I think he has 0.5 kg lots of filler and he sells tungstens (usually in 10 per pack). If you ring him, I reckon he'd put together whatever partial order you wanted. Cheers - Mick
-
30th March 2012, 07:41 PM #3
Intermediate Member
- Join Date
- Oct 2011
- Location
- Newcastle, NSW
- Posts
- 34
I have bought most of my tig wire through thor welding supplies as they do .5kg lots, fast postage and good prices too
HTH
James
-
30th March 2012, 11:13 PM #4
I break stuff...
- Join Date
- Aug 2010
- Location
- Melbourne
- Posts
- 539
I've bought stuff from him too, last order I did he stuffed up, sent me some 5356 instead of the 4047 I was after. When I contacted him, straight away he apologised, told me to keep the 5356, and sent out the 4047 immediately, all at no cost to me. Needless to say, I'm very happy with his service!
Originally Posted by bimbo
