![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: Cathedral ridgebeam support
-
1st April 2008, 09:37 AM #1
New Member
- Join Date
- Mar 2008
- Location
- Willunga
- Posts
- 2
Cathedral ridgebeam support
Hi guys,
long time looker first time poster. Does anyone know how to support a ridge beam at the gable end of a cathedral roof ? I am coming from a traditional roof to cathedral, which i imagine i can fishplate together, but does the other end of the ridgebeam need supporting?
Someone has suggested a 90mm RHS running inside the wall and the framing can be built around it. You wont see it because it's covered by plasterboard. Oh and this is on a 2 storey house!
cheers guys
-
1st April 2008, 10:02 AM #2
90mm RHS would probably work but you'll need to consult an engineer for wall thickness and fastening details for top and bottom connections.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
1st April 2008, 10:07 AM #3
1/16"
- Join Date
- Mar 2007
- Location
- Adelaide South Australia
- Posts
- 76
Don't force it, use a bigger hammer.
Timber is what you use. Wood is what you burn.
-
1st April 2008, 10:17 AM #4
My engineer specified RHS for the gable end. Then I attached 90 x 45 to each side so that I could connect the frame work and covered in plaster as you suggested.
-
1st April 2008, 06:53 PM #5
Similar Threads
-
cathedral doors
By mickp in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 8Last Post: 3rd March 2006, 12:20 PM