Results 1 to 6 of 6
Thread: Two-pack finishes
-
21st September 2002, 11:44 AM #1
Two-pack finishes
After many hints from yours truly SHMBO
bought me Neil's polishers' bible for my
birthday!
A very interesting and informative little
reference which is getting plenty of use.
However, there is no mention of 2-pack
finishes. I know you can't cover everything
but is this topic anathema to furniture
makers or do we only use it on floors etc?
I tried it with mixed results.The instructions on the can (which I did read carefully) were pretty basic and didn't deliver what they promised.
Does anyone know the secret?
Woodchuck
------------------
WoodchuckChas
-
21st September 2002, 05:06 PM #2Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 48
- Posts
- 579
Hi Chas,
The secret is to not use brands that are focused on the hobbiest market. Head to Russco's or Pioneer Industrial Products ( tell em I sent ya! ) Mirotone is one that I have had great success with over the years.
Also one very important thing about 2-part products is that when they say 10:1 they mean 10:1 not 11:1. The slightest difference can mean success or failure. All leading industrail brands will supply a measuring stick with the ratios clearly marked for two or three part mixes.
Cheers!
-
21st September 2002, 07:34 PM #3
G'day Chas
The reason for no 2 part info in book is that I really have little knowledge of it I have only ever used clear casting resin in a couple of finishes and that is all.
Had great success with the casting resin and have seen some brilliant finishes done with 2 part flow-pack type products but that's not enough for inclusion in the book. Shane is pretty well up with the 2 part stuff and is a good one to seek more info from.
Cheers - NeilKEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
Use the Report icon at the bottom of all Posts, PM's and Blog entries.
-
22nd September 2002, 12:06 AM #4
Could I get a little (or a lot......suit yourself) on the polisher's handbook as described above?
I would dearly luv to be able to get consistently good finishes on my creations but so far my results have been decidedly iffy.
------------------
Catch ya later,
Peter B.
(Corunetes)Catch ya later,
Peter B.
(Corunetes)
--------------------------
You, you and you, panic!..... The rest of you come with me!
-
22nd September 2002, 12:28 AM #5KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
Use the Report icon at the bottom of all Posts, PM's and Blog entries.
-
24th September 2002, 07:34 PM #6
Thank you Shane and Neil.
I shall venture out to Russco's
and give their product/s a go.
As they say in the Good Book "You get
what you pay for!"
Cheers
WoodchuckChas
Bookmarks