Results 1 to 12 of 12
  1. #1
    Join Date
    Feb 2004
    Location
    Adelaide Hills
    Posts
    123

    Question redgum coffee table

    Hi Folks,

    I'm wondering about a finish for a coffee table. It's made from recycled redgum ( old reatining wall) . The picture doesn't do it too much justice but it gives and idea at what was hiding under the wood rot and greying.

    So how should it be finished? :confused:

    Himzo
    There's no such thing as too many Routers

  2. #2
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    lacquer
    Regards, Bob Thomas

    www.wombatsawmill.com

  3. #3
    Join Date
    May 2005
    Location
    Magill, Adelaide
    Age
    60
    Posts
    213

    Default

    Impressive table well done
    Aussie Hardwood Number One

  4. #4
    Join Date
    May 2005
    Location
    Eden Hills, South Australia
    Age
    63
    Posts
    87

    Default

    Beautiful looking timber. The dudes round here rave about various ebeaut products. Sellawax, EEE, and minwax tend to be favourites (this is entirely hearsay: I've tried none of these). I tend to do minimalist type finishes: few coats of tung oil, or wipe it down with shellac. For my next project I want to try some sanding sealer (never used it before) to see what effect it has. I have used a high gloss polyurethane on a bathroom cabinet for its waterproof properties, and that came out, funilly enough, with a high gloss finish.

    I guess it depends on the effect your after, and the expected wear and tear on the piece.
    Those are my principles, and if you don't like them . . . well, I have others.

  5. #5
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Lacquer won't darken the timber anywhere near as much as oil.
    Regards, Bob Thomas

    www.wombatsawmill.com

  6. #6
    Join Date
    Dec 2001
    Location
    Between a rock & a hard place (vic)
    Posts
    367

    Thumbs up

    If you have spray gear go with lacquer.
    If not, a great finish is ubeauts hard shellac. Steer clear of oils on that peice as it will hide the fiddleback and darken the timber, making it diffcult to pick any feature.

    I've had extremely good results on redgum using the following:
    use a large soft bristled polishing mop apply a thinned sanding sealer coat of normal dewaxed shellac(with or without a little talc to fill grain), followed by building up the layers (lightly cutting them back with 1000+ paper in between). 3 layers is all I usually use, depending on how the piece looks. That should be all that's needed, but if you want you can cut back the final coat to a dry shine or alternatively use 0000 steel wool and wax to give a more subdued gloss/satin feel that is second to none.

  7. #7
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    0

    Default

    With fine-grained redgum, I'd recommend Danish Oil. More durable than shellac-based finishes, darkens it not too much, repairable, increases the grain contrast nicely and finishes to a satin sheen or a higher lustre depending on how you use it.
    Cheers, Ern

  8. #8
    Join Date
    Feb 2004
    Location
    Adelaide Hills
    Posts
    123

    Default

    Thanks guys,

    so my choices are Lacquer (yes I have spray gear), Danish oil or the "great mans" Hard Shellac.

    Hmmm, looks like I might have to do some experimenting on the underneath of the table top.

    If any other ideas come up please let me know.

    H.
    There's no such thing as too many Routers

  9. #9
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    0

    Default

    'experimenting underneath the table top' ... hmm, sure you're on the right forum here H??
    Cheers, Ern

  10. #10
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Quote Originally Posted by rsser
    'experimenting underneath the table top' ... hmm, sure you're on the right forum here H??
    Ern!!! :eek:

    Al

  11. #11
    Join Date
    Feb 2004
    Location
    Adelaide Hills
    Posts
    123

    Default

    'experimenting underneath the table top' ... hmm, sure you're on the right forum here H??
    :confused: :confused:
    There's no such thing as too many Routers

  12. #12
    Join Date
    Feb 2004
    Location
    Adelaide Hills
    Posts
    123

    Default

    use a large soft bristled polishing mop apply a thinned sanding sealer coat of normal dewaxed shellac(with or without a little talc to fill grain), followed by building up the layers (lightly cutting them back with 1000+ paper in between). 3 layers is all I usually use, depending on how the piece looks. That should be all that's needed, but if you want you can cut back the final coat to a dry shine or alternatively use 0000 steel wool and wax to give a more subdued gloss/satin feel that is second to none.
    I've decidedto go with this method, thanks Eastie.

    The oil just darkened the timber just a tad too much for my liking, and the laquer spraying technique deffinatly needs help

    regards,

    Himzo
    There's no such thing as too many Routers

Similar Threads

  1. Finish options for Redgum coffee table?
    By hamster in forum FINISHING
    Replies: 9
    Last Post: 29th August 2008, 04:08 PM
  2. Coffee table finish
    By Mark Woodward in forum FINISHING
    Replies: 0
    Last Post: 20th February 2000, 11:23 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •