Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2010
    Location
    East Geelong
    Posts
    6

    Default What sort of posts are needed to hold up a very lightweight screen

    I have a very lightweight privacy screen that I need to put up. It's probably only about 5kg. I need to put two posts in the ground to hold it up. I wonder if the 90 x 42 treated pine pieces would do the job, given that it is so light, or should I still stick to the 90 x 90 posts?

    It needs 1.8m above ground, so typically you'd need at least 600mm depth for the hole. But given the lightweight requirement, could I get away with a bit less?

    Cheers.

  2. #2
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    64
    Posts
    0

    Default

    While you may be able to get away with 90x42's as uprights, I definitely would not skimp on the depth of foundations.

    The screen may be lightweight but it's still inherently a "sail" that will catch the wind.

    Are you sure you only need two posts? That's a narrow screen...

    One alternative you could try is to use 1m@90x90 in the ground, bolting the TP studs to the sides with pairs of coach-bolts, much like a flagpole. This'd make maintenance of the screen easier in that you could remove the top bolt from each joint so the assembly would hinge around the lower bolt and fold down into easy reach.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  3. #3
    Join Date
    Jun 2003
    Location
    Sunbury, Vic
    Age
    85
    Posts
    632

    Default

    As Skew said, do not skimp on depth. I put up two metal screens using 70 x 35 with a bit more than 600mm in the ground, and concreted, and they are quite sound. They are decorative with patterns cut in so the wind has somewhere to go.
    If using ordinary treated pine it is recommended to paint the base of the posts with bitumen paint to retard rotting.
    Tom

    "It's good enough" is low aim

  4. #4
    Join Date
    Apr 2010
    Location
    East Geelong
    Posts
    6

    Default

    Quote Originally Posted by Skew ChiDAMN!! View Post
    While you may be able to get away with 90x42's as uprights, I definitely would not skimp on the depth of foundations.

    The screen may be lightweight but it's still inherently a "sail" that will catch the wind.

    Are you sure you only need two posts? That's a narrow screen...

    One alternative you could try is to use 1m@90x90 in the ground, bolting the TP studs to the sides with pairs of coach-bolts, much like a flagpole. This'd make maintenance of the screen easier in that you could remove the top bolt from each joint so the assembly would hinge around the lower bolt and fold down into easy reach.
    Yes, it's a very narrow screen - it only has to hide a wheelie bin. Privacy screen is actually not the correct word for it.
    I doubt that it would be a sail as it it has plenty of gaps - the wind would just pass right through it.

    I didn't really get your final suggestion. I don't know what you mean by TP studs.

    Yes, I was thinking about the 90 x 90 in the ground

  5. #5
    Join Date
    Apr 2010
    Location
    East Geelong
    Posts
    6

    Default

    Quote Originally Posted by Chesand View Post
    As Skew said, do not skimp on depth. I put up two metal screens using 70 x 35 with a bit more than 600mm in the ground, and concreted, and they are quite sound. They are decorative with patterns cut in so the wind has somewhere to go.
    If using ordinary treated pine it is recommended to paint the base of the posts with bitumen paint to retard rotting.
    Sounds like your screen is like mine - decorative with patterns cut into the wind. So 70 x 35 will do on one side, but I may go for 70 x 45 just in case - the other side is actually a colourbond fence so I can just connect the second post onto that.

    Cheers.

  6. #6
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    64
    Posts
    0

    Default

    Quote Originally Posted by gavinabrown View Post
    I didn't really get your final suggestion. I don't know what you mean by TP studs.

    Yes, I was thinking about the 90 x 90 in the ground
    Sorry, builders cant. TP = treated pine. By studs I mean lengths of (70-90)x(35-45)

    If you sink a couple of, say, 1.2m lengths of 90x90 posts 600mm into the ground, you could bolt the studs to the sides in such a way it folds down for easy maintenance.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

Similar Threads

  1. how does concrete hold posts in the one spot in the ground
    By Reno RSS Feed in forum GENERAL ODDS N SODS
    Replies: 0
    Last Post: 24th November 2015, 10:10 AM
  2. What posts for timber screen on deck
    By holdon in forum FINISHING
    Replies: 0
    Last Post: 16th November 2010, 12:54 PM
  3. Toughened glass. What sort of load can it hold?
    By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 1st June 2009, 02:40 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •