![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 11 of 11
-
27th April 2008, 01:53 PM #1
New Member
- Join Date
- Apr 2008
- Location
- Brisbane
- Posts
- 3
Making a steep concrete driveway non-slip
Hi, I'm new to this so sorry if this has already been discussed.
Just looking for the best way to reduce the slipperiness of my driveway that has a reasonable slope on it. It is just bare concrete (not polished, but sort of rough) and does get a buildup of grime, dirt etc which I'm sure adds to the slip factor.
When it's wet it can be pretty slippery.
What's the best solution of reducing this? Just a clear anti-slip cloating, or maybe paving paint with a non-slip additive? What about prep work?
Any thoughts please?
cheers
Ged
-
27th April 2008, 03:08 PM #2
Member
- Join Date
- Jan 2008
- Location
- wycheproof victoria
- Posts
- 95
hi what about that pebble stuff they put around pools probably a bit expensive not sure of the durability on a driveway.ive seen the painted driveways but with the traffic the paint tends to wear in places and looks ugly over time.maybe you could get away with a strip up the middle of that pebble stuff for walking on.just a thought.
-
27th April 2008, 03:39 PM #3
HCl
I'm thinking -
a few washes with Spirit of salts [Hydrochloric Acid 10%]
It would roughen up the surface, [Expose any Aggregate]
and get rid of the Grime.
But be CAREFUL; wear PPE.... Gloves etc
HCl is Dangerous and Burns Flesh
Flush with plenty of Water or weak Water and Baking Soda SolutionNavvi
-
27th April 2008, 04:06 PM #4
Senior Member
- Join Date
- Nov 2005
- Location
- Kilsyth
- Age
- 66
- Posts
- 300
-
27th April 2008, 05:57 PM #5
GOLD MEMBER
- Join Date
- Oct 2005
- Location
- Adelaide
- Posts
- 329
I wouldn't paint it with anything. It needs roughening up like Ivan suggests.
Cleaning might help. The buildup of deposited rubber from people spinning their wheels turns to slick with the slightest moisture.
If all else fails, Audi Quattro.
woodbe.
-
27th April 2008, 07:24 PM #6
What about a heap of concrete cuts across the surface.
-
27th April 2008, 07:42 PM #7
GOLD MEMBER
- Join Date
- Oct 2005
- Location
- Adelaide
- Posts
- 329
That could help.
-
27th April 2008, 08:51 PM #8
I have seen some steep driveways and roads with an anti-slip patch applied to it, either as a large area or as a series of strips across it.
It's got a sandy texture to it and is hard wearing, similar to here http://www.bestnonslip.com.au/products
-
28th April 2008, 10:30 PM #9
New Member
- Join Date
- Apr 2008
- Location
- Brisbane
- Posts
- 3
Thanks...
... for the information everyone. I think I'll just give it a high-pressure clean first, and see how much that improves it, then will look at acid-washing next, then anti-slip treatment as a last resort.
cheers
Ged
-
28th April 2008, 10:49 PM #10
This thread reminds me of a trick some of my workmates did on nightshift on cold canberra nights. There was this supervisor they didnt like so when he was nicely tucked up in bed they would turn his hose on his drive just a little for a few hours and then turn it off and roll it back up.
Poor block was late for work as he couldnt get up his drive for the ice....i still dont think he knows what was going on.
-
28th April 2008, 11:27 PM #11
Broom or stipple finish
If you wish an exposed aggregate would probably suit as steeper drive.
Some drives have a screed bashed/tampered finish to get ridges if they are really steep.
Concrete or limestone cobblestone pavers with pillows help traction.
You can high pressure hose the driveway to remove slippery grime. Possibly spray with a an anti mould formula.c2=a2+b2;
When buildings made with lime are subjected to small movements thay are more likely to develop many fine cracks than the individual large cracks which occur in stiffer cement-bound buildings. Water penetration can dissolve the 'free' lime and transport it. As the water evaporates, this lime is deposited and begins to heal the cracks. This process is called autogenous healing.
Similar Threads
-
Concrete Driveway
By Dr - 307 in forum CONCRETINGReplies: 7Last Post: 14th January 2008, 09:15 AM -
Filling in steep driveway center.
By MikeT in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etcReplies: 9Last Post: 29th December 2007, 11:21 AM -
concrete truck on driveway
By jeremy in forum CONCRETINGReplies: 8Last Post: 30th July 2006, 04:09 PM -
concrete driveway
By weekendwarrior in forum CONCRETINGReplies: 5Last Post: 20th October 2004, 08:55 PM -
Advice about new concrete driveway
By harrisonness in forum CONCRETINGReplies: 5Last Post: 7th September 2004, 09:19 AM