Thanks: 2
Likes: 3
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
8th July 2014, 11:01 PM #1
Looking for Size Range of Scroll Saw Blades
I have just purchased a new Scroll Saw and am looking at ordering blades from Helen & Owen Harris so I am looking for recommendations on which selection of sizes I should buy.
There seems to be so many to choose from and I would like to buy a selection that I could have in the workshop that would handle most jobs....eg without buying 1 pack of each & every type/size, should I be looking at
1 pack each of 3 different sizes .....2/0...... 5 ....... 7 in each of the following types:
Skip Tooth Blades with reverse teeth
Skip Tooth without reverse teeth
Double Tooth Blades with reverse teeth
Two Way Cut
Metal Cutting
Should I be looking at more sizes in addition to the above.....any help appreciated
-
8th July 2014, 11:20 PM #2Senior Member
- Join Date
- Jan 2012
- Location
- Yenda NSW
- Age
- 74
- Posts
- 342
I find that No3 & No5 plain skip tooth is all that I require for the work that I do,have various other sizes but rarely use them. I would start with a couple of basic sizes & you will soon see if you require anything else if at all. I also purchased a miniture chuck & small drills to suit the blades as well as a Quick release top blade holder,very handy.
Cheers Peter
-
20th July 2014, 07:01 PM #3
-
23rd July 2014, 07:23 PM #4Senior Member
- Join Date
- Jan 2012
- Location
- Yenda NSW
- Age
- 74
- Posts
- 342
Blade Clamp
Hegner Quick release clamp.jpg
Hi Nathan this is the quick release blade clamp I purchased from Helen Harris not cheap but well worth it ,around the $50 mark.
Cheers Peter
-
28th July 2014, 11:26 PM #5GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 2,956
Hi Skot, when you order from Helen and Owen, ask them for a list of the different blades, you could also ask what would be the best blades to buy for a beginner. She will probably want to know what material you'll be cutting as this will help a lot. I can personally vouch for her integrity.
Kryn
-
3rd August 2014, 06:43 PM #6
Kryn,
Yep I contacted Helen about the blades and she sent me all that info....very helpful....I ordered a selection of sizes & types (13 packs of a dozen in fact).
Ill work my way through them using the guide for appropriate blades for certain timbers. So far I have scrolled some 18mm Ply and today did 30mm pine. Have learnt a lot today about speed of saw, feed rate and line adjustment, especially on straight lines.......they are harder than curves....give me curves anytime.
My niece asked if I could do some Table decorations for her wedding. She gave me an example of a $5 "LOVE" ornament which is cut by CNC in China out of 15mm MDF and then 2 are glued together.......then she wanted the same type of thing with slightly different font but with her name, future hubby name & LOVE.
They took me about 1 3/4 hours each to do. Have to take it slow when cutting 30mm solid pine
"TONY" "LOVE" "NESS"
TLN.JPG
-
4th August 2014, 07:54 PM #7GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 2,956
Very nice work, they should be very happy with them. Skot, I forgot to mention that the quick release clamps are available from Helen also.
Regards
Kryn
-
4th August 2014, 10:51 PM #8
Quick Release.......How are they different from my Excalibur clamps