Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2007
    Location
    Melbourne, Australia
    Posts
    202

    Default Plastic Deck boards

    Heya guys,
    Was at bunnings when one of teh guys was talking to me about deck boards. They have this plastic deck board, that looks like merbu, but its made from a variety of materials, mainly plastic. Bascially lasts longer and looks/feels the same and does not need any maintance after they are screwed down.
    Anyone tried these? I know a Deck should be made from wood but hey...Is worth even looking at?>

  2. #2
    Join Date
    May 2004
    Location
    Pakenham, outer Melb SE suburb, Vic
    Age
    55
    Posts
    549

    Default

    Gday mate, there are a few variations around on the same thing, Modwood is one that comes to mind.

    Apparently a blend of recycled plastic (PVC I think) and sawdust. Some promotional material I read said it goes grey over time like real timber, this was touted as being a good thing, to my mind I'd rather it hold the original colour I chose for as long as possible.

    Does look good laid though, saw some at Designbuild last year that I'd be more than happy to have.

    Here's a couple of forum searches to work yer way through. Search 1 Search 2


    Cheers...............Sean


    The beatings will continue until morale improves.

  3. #3
    Join Date
    May 2004
    Location
    Pakenham, outer Melb SE suburb, Vic
    Age
    55
    Posts
    549

    Default

    BTW, what Bunnings did you see it at? Didn't know it was being trialled.


    Cheers......................Sean


    The beatings will continue until morale improves.

Similar Threads

  1. best way to trim deck boards post nailing
    By kayno in forum DECKING
    Replies: 18
    Last Post: 1st December 2006, 08:15 AM
  2. Advice: Secret nailing of deck boards
    By yugenpillay in forum DECKING
    Replies: 3
    Last Post: 12th April 2005, 09:03 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •