![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: cloudy finish under poly surface
-
7th October 2009, 09:49 AM #1
Intermediate Member
- Join Date
- Jun 2007
- Location
- Woodend, Victoria, Australia
- Posts
- 1
cloudy finish under poly surface
G'Day All,
our kitchen has a tired old Tas Myrtle laminated bench top that has a typical commercial polyurethane type finish.
It has several spots where a cloudy white layer has occurred under the finish, I suspect due to heat drawing the moisture out and being trapped under the finish.
Any suggestions for repair; other than a complete refinish of the bench top?
many thanks!
Cheerio Ned
-
7th October 2009, 09:08 PM #2
You're down to a complete refinish, I'm afraid!
-
8th October 2009, 05:50 PM #3
New Member
- Join Date
- May 2009
- Location
- mornigton peninsula
- Age
- 47
- Posts
- 7
Hi,
yeah that can happen when not enough time is left between coats, ive done it before.
Similar Threads
-
How to get a decent finish on 2 part Poly-U
By silentC in forum FINISHINGReplies: 15Last Post: 10th May 2007, 07:21 PM -
MDF FINISH - Tung/Poly/Wax
By dazzler in forum FINISHINGReplies: 3Last Post: 13th February 2006, 04:56 PM -
How to get matt surface finish
By cx3 in forum FINISHINGReplies: 2Last Post: 28th August 2003, 05:30 PM -
Wipe on poly finish
By Iain in forum FINISHINGReplies: 3Last Post: 23rd April 2002, 05:31 PM