![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: Sore neck anyone?
-
25th July 2006, 02:05 AM #1
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Sore neck anyone?
A few week ago I posted something about ear muffs giving me an earache. Well the last two weekends I have been getting ear and increasing neck aches. I now realize it's not the ear muffs after all but I may be doing too much neck bending. It was so bad saturday night I could barely sleep. The worst comes when I am hand sanding small objects basically close to my chest and have to bend zee neck to see what I'm doing. Also leaving a face shield fliped back on my head seems to exacerbate the problem.
Anyone else in the same boat?
-
25th July 2006, 09:28 AM #2rrich Guest
I have the same problem when sanding. My solution is to just sit on a stool next to the bench.
-
25th July 2006, 01:47 PM #3
Yep... sit at bench mate... heres what I did... I got one of those workmate vice benches just a cheep one will do mine was an old B&D one a bloke gave me as he was tossing it out... anyway take the legs off it so youve just got the top setup and bolt that to the top of the workbench (heres where it pays to have a lot of benches!
It brings the work up to you so you just sit on a stool at the bench and work on whatever on that workmate... great for small stuff and close work and one of the best uses Ive found is when Im making the pens... useing the small tables and small dog things its ideal for clamping the bits together perfectly like a vice... you have several angles of attack and you can bolt screw glue or clamp to it without hurting the bench... when the tops are buggared you just unscrew it and toss another chunk of mdf onto it... easy as!
or get one of those carver vices... ones cheep as chups the others gonna cost you a few bob either will work
I'll see if I can snuffle a shot of it for youOkay there it is! my benches are made to fit me and as Im a bit of a shortass they probably wouldnt fit you
however it will gain you a few extra inches of height and if you bolt it down so its not to difficult to remove you can when you need to pick it up and walk it up to the house to do some final finishing while yarnin with her bloody highness... and its easy to use cheep easily addapted to your needs and best of all effective for bringing work closer to you without hurtin yer neck
Cheers!
ahem... did I meantion I have 2 x 4mtr benches and 1 x 3mtr bench and still need MORE bench space?? sigh look at those poor wee tool creatures just bustin to work for me and yet... sighBelieve me there IS life beyond marriage!!! Relax breathe and smile learn to laugh again from the heart so it reaches the eyes!!
-
25th July 2006, 01:57 PM #4
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Thanks Guys, As I already have one of these I will have to make more use of it. I probably need to make it a little taller.
-
25th July 2006, 02:04 PM #5
Then again Bob if you have one of those clamp things sittin around twiddlin its threads you could also put it to use eh?
no worries!! nah no need to thank me mate call it a pressy from me to you alrighty? I know you would do the same if I asked
Believe me there IS life beyond marriage!!! Relax breathe and smile learn to laugh again from the heart so it reaches the eyes!!
-
25th July 2006, 03:11 PM #6
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Originally Posted by Wild Dingo
-
26th July 2006, 03:50 AM #7
yeah so? mines allways all covered in crap! and mate lets be positive here no negatives allowed so dont forget... the more bench space youve got the more crap coverin it... so i guess Ive got more crap than you eh!
Believe me there IS life beyond marriage!!! Relax breathe and smile learn to laugh again from the heart so it reaches the eyes!!
Similar Threads
-
Which finish for a maple guitar neck?
By old_picker in forum FINISHINGReplies: 7Last Post: 3rd October 2005, 12:42 AM