Results 1 to 6 of 6

Thread: gas stove

  1. #1
    Join Date
    Jun 2007
    Location
    Longreach
    Age
    59
    Posts
    0

    Default gas stove

    I have a gas stove that has a problem with the oven. I have had a gas fitter in to look at it, and he is of the opinion that the thermocouple is buggered, but seems to show no interest in fixing it. How hard can it be? I have found the part online and all it is is a probe with two wires, one to the oven valve, and one to what I would think is an earth. There is no gas fitting involved, so the question is, Would you fix it yourself? I feel total confident about doing the deed, but I am wondering:



    What any of you would do?

    All thoughts are welcome.

    Rob
    Check my facebook:rhbtimber

  2. #2
    Join Date
    Dec 2010
    Location
    Mornington Peninsula
    Posts
    408

    Default

    I would replace it - it really is very easy.

  3. #3
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

    Default

    I have replaced the thermocouple in the piece of junk laughing called a oven that I mistakenly purchased 3 times in less than 5 years at $100
    a time, very simple job, just take the old one out put the new one in

  4. #4
    Join Date
    Jan 2008
    Location
    Blue Mountains
    Age
    61
    Posts
    0

    Default

    Hi Specialist,

    As a gasfitter for over 30 years I must have changed 100's of the things.

    The thermocouple is an amazing safety device which draws minivolts of electrical current from the pilot flame and and uses the current to hold open an electro-magnetic gas valve. If the pilot goes out the thermocouple loses current and the electro-magnetic gas valve releases the valve shutting off the gas so you can't turn on the oven and have a dangerous build up of unignited gas.

    The main thing is to turn off the power supply to the cooker as some modern gas appliances have a fair bit of electrical wiring, especially around the end that screws into the gas valve. At the pilot end the main thing is to take care around the spark igniter electrode. There is usually a ceramic section which can crack under stress.

    Be safe and give it a go.
    Peter
    The time we enjoy wasting is not wasted time.

  5. #5
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    I'd give it a go but if you ever have a fire, don't mention that you repaired your gas stove yourself or the insurance company with drop you like a hot rock.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  6. #6
    Join Date
    Jun 2007
    Location
    Longreach
    Age
    59
    Posts
    0

    Default

    Thanks for the replies fellas, I will give it a go, stove is no good at the moment and as I mentioned before, the gasfitter doesn't seem to want to do it so it really leaves little alternative but to fix it myself.

    Rob
    Check my facebook:rhbtimber

Similar Threads

  1. Stove black
    By burraboy in forum FINISHING
    Replies: 22
    Last Post: 17th September 2011, 11:26 AM
  2. Gas stove intallation
    By tea lady in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 7
    Last Post: 7th January 2008, 09:47 PM
  3. New Gas Stove
    By LegacyGT in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 8
    Last Post: 2nd January 2008, 09:48 AM
  4. Splashbacks behind gas stove
    By totoblue in forum KITCHENS
    Replies: 4
    Last Post: 14th February 2006, 12:48 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •